Wireless LAN (WLAN) ConfigurationHere is the configuration for WLAN. The WLAN is configured for Layer
3 security. This configuration maps the authentication list to Local_webauth and ensures that the authentication is handled by the local net users. This calls the AAA configuration that is in the initial step.
wlan webauth 1 webauthclient vlan Vlanxno security wpano security wpa akm dot1xno security wpa wpa2no security wpa wpa2 ciphers aessecurity web-authsecurity web-auth authentication-list local_webauthsecurity web-auth parameter-map customsession-timeout 1800no shutdown Reference:http://www.cisco.com/c/en/us/support/docs/wireless/5700-series-wireless-lan- controllers/117728-configure-wlc-00.html
NEW QUESTION: 2
wIPSサービスを備えた新しいMSEがインストールされており、アラーム情報がコントローラからMSEに到達していないようです。コントローラからMSEに到達するために許可する必要があるプロトコルはどれですか。
A. SOAP/XML
B. SNMP
C. NMSP
D. CAPWAP
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/mse/7-6/MSE_wIPS/MSE_wIPS_7_6/MSE_wIPS_7_5_chapter_01000.html
NEW QUESTION: 3
Your main internal network 10.10.10.0/24 allows all traffic to the Internet using Hide NAT.
You also have a small network 10.10.20.0/24 behind the internal router. You want to configure the kernel to translate the source address only when network 10.10.20.0 tries to access the Internet for HTTP, SMTP, and FTP services. Which of the following configurations will allow this network to access the Internet?
A. Configure Automatic Hide NAT on network 10.10.20.0/24 and then edit the Service column in the NAT Rule Base on the automatic rule.
B. Configure one Manual Hide NAT rule for HTTP, FTP, and SMTP services for network
10.10.20.0/24.
C. Configure three Manual Static NAT rules for network 10.10.20.0/24, one for each service.
D. Configure Automatic Static NAT on network 10.10.20.0/24.
Answer: B
NEW QUESTION: 4
CORRECT TEXT
Identify the correct system available category for each feature.
Answer:
Explanation:
Fault Prevention: Pre-Fault Waranties, Error checking and correcting | Fault Tolerance: Hardware Redudancy | Rapid Recovery: Automatic System Recovery, Server Disk Array
NEW QUESTION: 2
wIPSサービスを備えた新しいMSEがインストールされており、アラーム情報がコントローラからMSEに到達していないようです。コントローラからMSEに到達するために許可する必要があるプロトコルはどれですか。
A. SOAP/XML
B. SNMP
C. NMSP
D. CAPWAP
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/mse/7-6/MSE_wIPS/MSE_wIPS_7_6/MSE_wIPS_7_5_chapter_01000.html
NEW QUESTION: 3
Your main internal network 10.10.10.0/24 allows all traffic to the Internet using Hide NAT.
You also have a small network 10.10.20.0/24 behind the internal router. You want to configure the kernel to translate the source address only when network 10.10.20.0 tries to access the Internet for HTTP, SMTP, and FTP services. Which of the following configurations will allow this network to access the Internet?
A. Configure Automatic Hide NAT on network 10.10.20.0/24 and then edit the Service column in the NAT Rule Base on the automatic rule.
B. Configure one Manual Hide NAT rule for HTTP, FTP, and SMTP services for network
10.10.20.0/24.
C. Configure three Manual Static NAT rules for network 10.10.20.0/24, one for each service.
D. Configure Automatic Static NAT on network 10.10.20.0/24.
Answer: B
NEW QUESTION: 4
CORRECT TEXT
Identify the correct system available category for each feature.
Answer:
Explanation:
Fault Prevention: Pre-Fault Waranties, Error checking and correcting | Fault Tolerance: Hardware Redudancy | Rapid Recovery: Automatic System Recovery, Server Disk Array
NEW QUESTION: 2
wIPSサービスを備えた新しいMSEがインストールされており、アラーム情報がコントローラからMSEに到達していないようです。コントローラからMSEに到達するために許可する必要があるプロトコルはどれですか。
A. SOAP/XML
B. SNMP
C. NMSP
D. CAPWAP
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/mse/7-6/MSE_wIPS/MSE_wIPS_7_6/MSE_wIPS_7_5_chapter_01000.html
NEW QUESTION: 3
Your main internal network 10.10.10.0/24 allows all traffic to the Internet using Hide NAT.
You also have a small network 10.10.20.0/24 behind the internal router. You want to configure the kernel to translate the source address only when network 10.10.20.0 tries to access the Internet for HTTP, SMTP, and FTP services. Which of the following configurations will allow this network to access the Internet?
A. Configure Automatic Hide NAT on network 10.10.20.0/24 and then edit the Service column in the NAT Rule Base on the automatic rule.
B. Configure one Manual Hide NAT rule for HTTP, FTP, and SMTP services for network
10.10.20.0/24.
C. Configure three Manual Static NAT rules for network 10.10.20.0/24, one for each service.
D. Configure Automatic Static NAT on network 10.10.20.0/24.
Answer: B
NEW QUESTION: 4
CORRECT TEXT
Identify the correct system available category for each feature.
Answer:
Explanation:
Fault Prevention: Pre-Fault Waranties, Error checking and correcting | Fault Tolerance: Hardware Redudancy | Rapid Recovery: Automatic System Recovery, Server Disk Array
NEW QUESTION: 2
wIPSサービスを備えた新しいMSEがインストールされており、アラーム情報がコントローラからMSEに到達していないようです。コントローラからMSEに到達するために許可する必要があるプロトコルはどれですか。
A. SOAP/XML
B. SNMP
C. NMSP
D. CAPWAP
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/mse/7-6/MSE_wIPS/MSE_wIPS_7_6/MSE_wIPS_7_5_chapter_01000.html
NEW QUESTION: 3
Your main internal network 10.10.10.0/24 allows all traffic to the Internet using Hide NAT.
You also have a small network 10.10.20.0/24 behind the internal router. You want to configure the kernel to translate the source address only when network 10.10.20.0 tries to access the Internet for HTTP, SMTP, and FTP services. Which of the following configurations will allow this network to access the Internet?
A. Configure Automatic Hide NAT on network 10.10.20.0/24 and then edit the Service column in the NAT Rule Base on the automatic rule.
B. Configure one Manual Hide NAT rule for HTTP, FTP, and SMTP services for network
10.10.20.0/24.
C. Configure three Manual Static NAT rules for network 10.10.20.0/24, one for each service.
D. Configure Automatic Static NAT on network 10.10.20.0/24.
Answer: B
NEW QUESTION: 4
CORRECT TEXT
Identify the correct system available category for each feature.
Answer:
Explanation:
Fault Prevention: Pre-Fault Waranties, Error checking and correcting | Fault Tolerance: Hardware Redudancy | Rapid Recovery: Automatic System Recovery, Server Disk Array
NEW QUESTION: 2
wIPSサービスを備えた新しいMSEがインストールされており、アラーム情報がコントローラからMSEに到達していないようです。コントローラからMSEに到達するために許可する必要があるプロトコルはどれですか。
A. SOAP/XML
B. SNMP
C. NMSP
D. CAPWAP
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/mse/7-6/MSE_wIPS/MSE_wIPS_7_6/MSE_wIPS_7_5_chapter_01000.html
NEW QUESTION: 3
Your main internal network 10.10.10.0/24 allows all traffic to the Internet using Hide NAT.
You also have a small network 10.10.20.0/24 behind the internal router. You want to configure the kernel to translate the source address only when network 10.10.20.0 tries to access the Internet for HTTP, SMTP, and FTP services. Which of the following configurations will allow this network to access the Internet?
A. Configure Automatic Hide NAT on network 10.10.20.0/24 and then edit the Service column in the NAT Rule Base on the automatic rule.
B. Configure one Manual Hide NAT rule for HTTP, FTP, and SMTP services for network
10.10.20.0/24.
C. Configure three Manual Static NAT rules for network 10.10.20.0/24, one for each service.
D. Configure Automatic Static NAT on network 10.10.20.0/24.
Answer: B
NEW QUESTION: 4
CORRECT TEXT
Identify the correct system available category for each feature.
Answer:
Explanation:
Fault Prevention: Pre-Fault Waranties, Error checking and correcting | Fault Tolerance: Hardware Redudancy | Rapid Recovery: Automatic System Recovery, Server Disk Array
NEW QUESTION: 2
wIPSサービスを備えた新しいMSEがインストールされており、アラーム情報がコントローラからMSEに到達していないようです。コントローラからMSEに到達するために許可する必要があるプロトコルはどれですか。
A. SOAP/XML
B. SNMP
C. NMSP
D. CAPWAP
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/mse/7-6/MSE_wIPS/MSE_wIPS_7_6/MSE_wIPS_7_5_chapter_01000.html
NEW QUESTION: 3
Your main internal network 10.10.10.0/24 allows all traffic to the Internet using Hide NAT.
You also have a small network 10.10.20.0/24 behind the internal router. You want to configure the kernel to translate the source address only when network 10.10.20.0 tries to access the Internet for HTTP, SMTP, and FTP services. Which of the following configurations will allow this network to access the Internet?
A. Configure Automatic Hide NAT on network 10.10.20.0/24 and then edit the Service column in the NAT Rule Base on the automatic rule.
B. Configure one Manual Hide NAT rule for HTTP, FTP, and SMTP services for network
10.10.20.0/24.
C. Configure three Manual Static NAT rules for network 10.10.20.0/24, one for each service.
D. Configure Automatic Static NAT on network 10.10.20.0/24.
Answer: B
NEW QUESTION: 4
CORRECT TEXT
Identify the correct system available category for each feature.
Answer:
Explanation:
Fault Prevention: Pre-Fault Waranties, Error checking and correcting | Fault Tolerance: Hardware Redudancy | Rapid Recovery: Automatic System Recovery, Server Disk Array
NEW QUESTION: 2
wIPSサービスを備えた新しいMSEがインストールされており、アラーム情報がコントローラからMSEに到達していないようです。コントローラからMSEに到達するために許可する必要があるプロトコルはどれですか。
A. SOAP/XML
B. SNMP
C. NMSP
D. CAPWAP
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/mse/7-6/MSE_wIPS/MSE_wIPS_7_6/MSE_wIPS_7_5_chapter_01000.html
NEW QUESTION: 3
Your main internal network 10.10.10.0/24 allows all traffic to the Internet using Hide NAT.
You also have a small network 10.10.20.0/24 behind the internal router. You want to configure the kernel to translate the source address only when network 10.10.20.0 tries to access the Internet for HTTP, SMTP, and FTP services. Which of the following configurations will allow this network to access the Internet?
A. Configure Automatic Hide NAT on network 10.10.20.0/24 and then edit the Service column in the NAT Rule Base on the automatic rule.
B. Configure one Manual Hide NAT rule for HTTP, FTP, and SMTP services for network
10.10.20.0/24.
C. Configure three Manual Static NAT rules for network 10.10.20.0/24, one for each service.
D. Configure Automatic Static NAT on network 10.10.20.0/24.
Answer: B
NEW QUESTION: 4
CORRECT TEXT
Identify the correct system available category for each feature.
Answer:
Explanation:
Fault Prevention: Pre-Fault Waranties, Error checking and correcting | Fault Tolerance: Hardware Redudancy | Rapid Recovery: Automatic System Recovery, Server Disk Array
NEW QUESTION: 2
wIPSサービスを備えた新しいMSEがインストールされており、アラーム情報がコントローラからMSEに到達していないようです。コントローラからMSEに到達するために許可する必要があるプロトコルはどれですか。
A. SOAP/XML
B. SNMP
C. NMSP
D. CAPWAP
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/mse/7-6/MSE_wIPS/MSE_wIPS_7_6/MSE_wIPS_7_5_chapter_01000.html
NEW QUESTION: 3
Your main internal network 10.10.10.0/24 allows all traffic to the Internet using Hide NAT.
You also have a small network 10.10.20.0/24 behind the internal router. You want to configure the kernel to translate the source address only when network 10.10.20.0 tries to access the Internet for HTTP, SMTP, and FTP services. Which of the following configurations will allow this network to access the Internet?
A. Configure Automatic Hide NAT on network 10.10.20.0/24 and then edit the Service column in the NAT Rule Base on the automatic rule.
B. Configure one Manual Hide NAT rule for HTTP, FTP, and SMTP services for network
10.10.20.0/24.
C. Configure three Manual Static NAT rules for network 10.10.20.0/24, one for each service.
D. Configure Automatic Static NAT on network 10.10.20.0/24.
Answer: B
NEW QUESTION: 4
CORRECT TEXT
Identify the correct system available category for each feature.
Answer:
Explanation:
Fault Prevention: Pre-Fault Waranties, Error checking and correcting | Fault Tolerance: Hardware Redudancy | Rapid Recovery: Automatic System Recovery, Server Disk Array
NEW QUESTION: 2
wIPSサービスを備えた新しいMSEがインストールされており、アラーム情報がコントローラからMSEに到達していないようです。コントローラからMSEに到達するために許可する必要があるプロトコルはどれですか。
A. SOAP/XML
B. SNMP
C. NMSP
D. CAPWAP
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/mse/7-6/MSE_wIPS/MSE_wIPS_7_6/MSE_wIPS_7_5_chapter_01000.html
NEW QUESTION: 3
Your main internal network 10.10.10.0/24 allows all traffic to the Internet using Hide NAT.
You also have a small network 10.10.20.0/24 behind the internal router. You want to configure the kernel to translate the source address only when network 10.10.20.0 tries to access the Internet for HTTP, SMTP, and FTP services. Which of the following configurations will allow this network to access the Internet?
A. Configure Automatic Hide NAT on network 10.10.20.0/24 and then edit the Service column in the NAT Rule Base on the automatic rule.
B. Configure one Manual Hide NAT rule for HTTP, FTP, and SMTP services for network
10.10.20.0/24.
C. Configure three Manual Static NAT rules for network 10.10.20.0/24, one for each service.
D. Configure Automatic Static NAT on network 10.10.20.0/24.
Answer: B
NEW QUESTION: 4
CORRECT TEXT
Identify the correct system available category for each feature.
Answer:
Explanation:
Fault Prevention: Pre-Fault Waranties, Error checking and correcting | Fault Tolerance: Hardware Redudancy | Rapid Recovery: Automatic System Recovery, Server Disk Array
NEW QUESTION: 2
wIPSサービスを備えた新しいMSEがインストールされており、アラーム情報がコントローラからMSEに到達していないようです。コントローラからMSEに到達するために許可する必要があるプロトコルはどれですか。
A. SOAP/XML
B. SNMP
C. NMSP
D. CAPWAP
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/mse/7-6/MSE_wIPS/MSE_wIPS_7_6/MSE_wIPS_7_5_chapter_01000.html
NEW QUESTION: 3
Your main internal network 10.10.10.0/24 allows all traffic to the Internet using Hide NAT.
You also have a small network 10.10.20.0/24 behind the internal router. You want to configure the kernel to translate the source address only when network 10.10.20.0 tries to access the Internet for HTTP, SMTP, and FTP services. Which of the following configurations will allow this network to access the Internet?
A. Configure Automatic Hide NAT on network 10.10.20.0/24 and then edit the Service column in the NAT Rule Base on the automatic rule.
B. Configure one Manual Hide NAT rule for HTTP, FTP, and SMTP services for network
10.10.20.0/24.
C. Configure three Manual Static NAT rules for network 10.10.20.0/24, one for each service.
D. Configure Automatic Static NAT on network 10.10.20.0/24.
Answer: B
NEW QUESTION: 4
CORRECT TEXT
Identify the correct system available category for each feature.
Answer:
Explanation:
Fault Prevention: Pre-Fault Waranties, Error checking and correcting | Fault Tolerance: Hardware Redudancy | Rapid Recovery: Automatic System Recovery, Server Disk Array
NEW QUESTION: 2
wIPSサービスを備えた新しいMSEがインストールされており、アラーム情報がコントローラからMSEに到達していないようです。コントローラからMSEに到達するために許可する必要があるプロトコルはどれですか。
A. SOAP/XML
B. SNMP
C. NMSP
D. CAPWAP
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/mse/7-6/MSE_wIPS/MSE_wIPS_7_6/MSE_wIPS_7_5_chapter_01000.html
NEW QUESTION: 3
Your main internal network 10.10.10.0/24 allows all traffic to the Internet using Hide NAT.
You also have a small network 10.10.20.0/24 behind the internal router. You want to configure the kernel to translate the source address only when network 10.10.20.0 tries to access the Internet for HTTP, SMTP, and FTP services. Which of the following configurations will allow this network to access the Internet?
A. Configure Automatic Hide NAT on network 10.10.20.0/24 and then edit the Service column in the NAT Rule Base on the automatic rule.
B. Configure one Manual Hide NAT rule for HTTP, FTP, and SMTP services for network
10.10.20.0/24.
C. Configure three Manual Static NAT rules for network 10.10.20.0/24, one for each service.
D. Configure Automatic Static NAT on network 10.10.20.0/24.
Answer: B
NEW QUESTION: 4
CORRECT TEXT
Identify the correct system available category for each feature.
Answer:
Explanation:
Fault Prevention: Pre-Fault Waranties, Error checking and correcting | Fault Tolerance: Hardware Redudancy | Rapid Recovery: Automatic System Recovery, Server Disk Array
NEW QUESTION: 2
wIPSサービスを備えた新しいMSEがインストールされており、アラーム情報がコントローラからMSEに到達していないようです。コントローラからMSEに到達するために許可する必要があるプロトコルはどれですか。
A. SOAP/XML
B. SNMP
C. NMSP
D. CAPWAP
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/mse/7-6/MSE_wIPS/MSE_wIPS_7_6/MSE_wIPS_7_5_chapter_01000.html
NEW QUESTION: 3
Your main internal network 10.10.10.0/24 allows all traffic to the Internet using Hide NAT.
You also have a small network 10.10.20.0/24 behind the internal router. You want to configure the kernel to translate the source address only when network 10.10.20.0 tries to access the Internet for HTTP, SMTP, and FTP services. Which of the following configurations will allow this network to access the Internet?
A. Configure Automatic Hide NAT on network 10.10.20.0/24 and then edit the Service column in the NAT Rule Base on the automatic rule.
B. Configure one Manual Hide NAT rule for HTTP, FTP, and SMTP services for network
10.10.20.0/24.
C. Configure three Manual Static NAT rules for network 10.10.20.0/24, one for each service.
D. Configure Automatic Static NAT on network 10.10.20.0/24.
Answer: B
NEW QUESTION: 4
CORRECT TEXT
Identify the correct system available category for each feature.
Answer:
Explanation:
Fault Prevention: Pre-Fault Waranties, Error checking and correcting | Fault Tolerance: Hardware Redudancy | Rapid Recovery: Automatic System Recovery, Server Disk Array
NEW QUESTION: 2
wIPSサービスを備えた新しいMSEがインストールされており、アラーム情報がコントローラからMSEに到達していないようです。コントローラからMSEに到達するために許可する必要があるプロトコルはどれですか。
A. SOAP/XML
B. SNMP
C. NMSP
D. CAPWAP
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/mse/7-6/MSE_wIPS/MSE_wIPS_7_6/MSE_wIPS_7_5_chapter_01000.html
NEW QUESTION: 3
Your main internal network 10.10.10.0/24 allows all traffic to the Internet using Hide NAT.
You also have a small network 10.10.20.0/24 behind the internal router. You want to configure the kernel to translate the source address only when network 10.10.20.0 tries to access the Internet for HTTP, SMTP, and FTP services. Which of the following configurations will allow this network to access the Internet?
A. Configure Automatic Hide NAT on network 10.10.20.0/24 and then edit the Service column in the NAT Rule Base on the automatic rule.
B. Configure one Manual Hide NAT rule for HTTP, FTP, and SMTP services for network
10.10.20.0/24.
C. Configure three Manual Static NAT rules for network 10.10.20.0/24, one for each service.
D. Configure Automatic Static NAT on network 10.10.20.0/24.
Answer: B
NEW QUESTION: 4
CORRECT TEXT
Identify the correct system available category for each feature.
Answer:
Explanation:
Fault Prevention: Pre-Fault Waranties, Error checking and correcting | Fault Tolerance: Hardware Redudancy | Rapid Recovery: Automatic System Recovery, Server Disk Array
NEW QUESTION: 3
Your main internal network 10.10.10.0/24 allows all traffic to the Internet using Hide NAT.
You also have a small network 10.10.20.0/24 behind the internal router. You want to configure the kernel to translate the source address only when network 10.10.20.0 tries to access the Internet for HTTP, SMTP, and FTP services. Which of the following configurations will allow this network to access the Internet?
A. Configure Automatic Hide NAT on network 10.10.20.0/24 and then edit the Service column in the NAT Rule Base on the automatic rule.
B. Configure one Manual Hide NAT rule for HTTP, FTP, and SMTP services for network
10.10.20.0/24.
C. Configure three Manual Static NAT rules for network 10.10.20.0/24, one for each service.
D. Configure Automatic Static NAT on network 10.10.20.0/24.
Answer: B
NEW QUESTION: 4
CORRECT TEXT
Identify the correct system available category for each feature.
Answer:
Explanation:
Fault Prevention: Pre-Fault Waranties, Error checking and correcting | Fault Tolerance: Hardware Redudancy | Rapid Recovery: Automatic System Recovery, Server Disk Array
NEW QUESTION: 2
wIPSサービスを備えた新しいMSEがインストールされており、アラーム情報がコントローラからMSEに到達していないようです。コントローラからMSEに到達するために許可する必要があるプロトコルはどれですか。
A. SOAP/XML
B. SNMP
C. NMSP
D. CAPWAP
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/mse/7-6/MSE_wIPS/MSE_wIPS_7_6/MSE_wIPS_7_5_chapter_01000.html
NEW QUESTION: 3
Your main internal network 10.10.10.0/24 allows all traffic to the Internet using Hide NAT.
You also have a small network 10.10.20.0/24 behind the internal router. You want to configure the kernel to translate the source address only when network 10.10.20.0 tries to access the Internet for HTTP, SMTP, and FTP services. Which of the following configurations will allow this network to access the Internet?
A. Configure Automatic Hide NAT on network 10.10.20.0/24 and then edit the Service column in the NAT Rule Base on the automatic rule.
B. Configure one Manual Hide NAT rule for HTTP, FTP, and SMTP services for network
10.10.20.0/24.
C. Configure three Manual Static NAT rules for network 10.10.20.0/24, one for each service.
D. Configure Automatic Static NAT on network 10.10.20.0/24.
Answer: B
NEW QUESTION: 4
CORRECT TEXT
Identify the correct system available category for each feature.
Answer:
Explanation:
Fault Prevention: Pre-Fault Waranties, Error checking and correcting | Fault Tolerance: Hardware Redudancy | Rapid Recovery: Automatic System Recovery, Server Disk Array
NEW QUESTION: 3
Your main internal network 10.10.10.0/24 allows all traffic to the Internet using Hide NAT.
You also have a small network 10.10.20.0/24 behind the internal router. You want to configure the kernel to translate the source address only when network 10.10.20.0 tries to access the Internet for HTTP, SMTP, and FTP services. Which of the following configurations will allow this network to access the Internet?
A. Configure Automatic Hide NAT on network 10.10.20.0/24 and then edit the Service column in the NAT Rule Base on the automatic rule.
B. Configure one Manual Hide NAT rule for HTTP, FTP, and SMTP services for network
10.10.20.0/24.
C. Configure three Manual Static NAT rules for network 10.10.20.0/24, one for each service.
D. Configure Automatic Static NAT on network 10.10.20.0/24.
Answer: B
NEW QUESTION: 4
CORRECT TEXT
Identify the correct system available category for each feature.
Answer:
Explanation:
Fault Prevention: Pre-Fault Waranties, Error checking and correcting | Fault Tolerance: Hardware Redudancy | Rapid Recovery: Automatic System Recovery, Server Disk Array
Online Test Engine supports Windows / Mac / Android / iOS, etc., because it is the software based on WEB browser.
NEW QUESTION: 2
wIPSサービスを備えた新しいMSEがインストールされており、アラーム情報がコントローラからMSEに到達していないようです。コントローラからMSEに到達するために許可する必要があるプロトコルはどれですか。
A. SOAP/XML
B. SNMP
C. NMSP
D. CAPWAP
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/mse/7-6/MSE_wIPS/MSE_wIPS_7_6/MSE_wIPS_7_5_chapter_01000.html
NEW QUESTION: 3
Your main internal network 10.10.10.0/24 allows all traffic to the Internet using Hide NAT.
You also have a small network 10.10.20.0/24 behind the internal router. You want to configure the kernel to translate the source address only when network 10.10.20.0 tries to access the Internet for HTTP, SMTP, and FTP services. Which of the following configurations will allow this network to access the Internet?
A. Configure Automatic Hide NAT on network 10.10.20.0/24 and then edit the Service column in the NAT Rule Base on the automatic rule.
B. Configure one Manual Hide NAT rule for HTTP, FTP, and SMTP services for network
10.10.20.0/24.
C. Configure three Manual Static NAT rules for network 10.10.20.0/24, one for each service.
D. Configure Automatic Static NAT on network 10.10.20.0/24.
Answer: B
NEW QUESTION: 4
CORRECT TEXT
Identify the correct system available category for each feature.
Answer:
Explanation:
Fault Prevention: Pre-Fault Waranties, Error checking and correcting | Fault Tolerance: Hardware Redudancy | Rapid Recovery: Automatic System Recovery, Server Disk Array
NEW QUESTION: 2
wIPSサービスを備えた新しいMSEがインストールされており、アラーム情報がコントローラからMSEに到達していないようです。コントローラからMSEに到達するために許可する必要があるプロトコルはどれですか。
A. SOAP/XML
B. SNMP
C. NMSP
D. CAPWAP
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/mse/7-6/MSE_wIPS/MSE_wIPS_7_6/MSE_wIPS_7_5_chapter_01000.html
NEW QUESTION: 3
Your main internal network 10.10.10.0/24 allows all traffic to the Internet using Hide NAT.
You also have a small network 10.10.20.0/24 behind the internal router. You want to configure the kernel to translate the source address only when network 10.10.20.0 tries to access the Internet for HTTP, SMTP, and FTP services. Which of the following configurations will allow this network to access the Internet?
A. Configure Automatic Hide NAT on network 10.10.20.0/24 and then edit the Service column in the NAT Rule Base on the automatic rule.
B. Configure one Manual Hide NAT rule for HTTP, FTP, and SMTP services for network
10.10.20.0/24.
C. Configure three Manual Static NAT rules for network 10.10.20.0/24, one for each service.
D. Configure Automatic Static NAT on network 10.10.20.0/24.
Answer: B
NEW QUESTION: 4
CORRECT TEXT
Identify the correct system available category for each feature.
Answer:
Explanation:
Fault Prevention: Pre-Fault Waranties, Error checking and correcting | Fault Tolerance: Hardware Redudancy | Rapid Recovery: Automatic System Recovery, Server Disk Array
NEW QUESTION: 3
Your main internal network 10.10.10.0/24 allows all traffic to the Internet using Hide NAT.
You also have a small network 10.10.20.0/24 behind the internal router. You want to configure the kernel to translate the source address only when network 10.10.20.0 tries to access the Internet for HTTP, SMTP, and FTP services. Which of the following configurations will allow this network to access the Internet?
A. Configure Automatic Hide NAT on network 10.10.20.0/24 and then edit the Service column in the NAT Rule Base on the automatic rule.
B. Configure one Manual Hide NAT rule for HTTP, FTP, and SMTP services for network
10.10.20.0/24.
C. Configure three Manual Static NAT rules for network 10.10.20.0/24, one for each service.
D. Configure Automatic Static NAT on network 10.10.20.0/24.
Answer: B
NEW QUESTION: 4
CORRECT TEXT
Identify the correct system available category for each feature.
Answer:
Explanation:
Fault Prevention: Pre-Fault Waranties, Error checking and correcting | Fault Tolerance: Hardware Redudancy | Rapid Recovery: Automatic System Recovery, Server Disk Array
NEW QUESTION: 2
wIPSサービスを備えた新しいMSEがインストールされており、アラーム情報がコントローラからMSEに到達していないようです。コントローラからMSEに到達するために許可する必要があるプロトコルはどれですか。
A. SOAP/XML
B. SNMP
C. NMSP
D. CAPWAP
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/mse/7-6/MSE_wIPS/MSE_wIPS_7_6/MSE_wIPS_7_5_chapter_01000.html
NEW QUESTION: 3
Your main internal network 10.10.10.0/24 allows all traffic to the Internet using Hide NAT.
You also have a small network 10.10.20.0/24 behind the internal router. You want to configure the kernel to translate the source address only when network 10.10.20.0 tries to access the Internet for HTTP, SMTP, and FTP services. Which of the following configurations will allow this network to access the Internet?
A. Configure Automatic Hide NAT on network 10.10.20.0/24 and then edit the Service column in the NAT Rule Base on the automatic rule.
B. Configure one Manual Hide NAT rule for HTTP, FTP, and SMTP services for network
10.10.20.0/24.
C. Configure three Manual Static NAT rules for network 10.10.20.0/24, one for each service.
D. Configure Automatic Static NAT on network 10.10.20.0/24.
Answer: B
NEW QUESTION: 4
CORRECT TEXT
Identify the correct system available category for each feature.
Answer:
Explanation:
Fault Prevention: Pre-Fault Waranties, Error checking and correcting | Fault Tolerance: Hardware Redudancy | Rapid Recovery: Automatic System Recovery, Server Disk Array
NEW QUESTION: 2
wIPSサービスを備えた新しいMSEがインストールされており、アラーム情報がコントローラからMSEに到達していないようです。コントローラからMSEに到達するために許可する必要があるプロトコルはどれですか。
A. SOAP/XML
B. SNMP
C. NMSP
D. CAPWAP
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/mse/7-6/MSE_wIPS/MSE_wIPS_7_6/MSE_wIPS_7_5_chapter_01000.html
NEW QUESTION: 3
Your main internal network 10.10.10.0/24 allows all traffic to the Internet using Hide NAT.
You also have a small network 10.10.20.0/24 behind the internal router. You want to configure the kernel to translate the source address only when network 10.10.20.0 tries to access the Internet for HTTP, SMTP, and FTP services. Which of the following configurations will allow this network to access the Internet?
A. Configure Automatic Hide NAT on network 10.10.20.0/24 and then edit the Service column in the NAT Rule Base on the automatic rule.
B. Configure one Manual Hide NAT rule for HTTP, FTP, and SMTP services for network
10.10.20.0/24.
C. Configure three Manual Static NAT rules for network 10.10.20.0/24, one for each service.
D. Configure Automatic Static NAT on network 10.10.20.0/24.
Answer: B
NEW QUESTION: 4
CORRECT TEXT
Identify the correct system available category for each feature.
Answer:
Explanation:
Fault Prevention: Pre-Fault Waranties, Error checking and correcting | Fault Tolerance: Hardware Redudancy | Rapid Recovery: Automatic System Recovery, Server Disk Array
Splunk SPLK-1004 Zertifizierungsprüfung ist inzwischen eine sehr wichtige Prüfung mit großem Einfluss, die Ihre Computer-Kenntnisse testen können, Es liegt bei Ihnen, welchen Typ zu benutzen und braucht Sie keine Sorgen zu machen, dass die geeignetste Version nicht finden können, weil unsere SPLK-1004 Prüfungsunterlagen sind die umfassendste Materialien und bietet insgesamt drei Möglichkeiten, Splunk SPLK-1004 Online Test Aber man braucht nicht unbedingt viel Zeit und Energie, die Fachkenntnisse kennen zu lernen.
Die IT-Prüfung und die Zertifizierung sind heutztage immer wichtiger geworden als je zuvor in der konkurrenzfähigen Welt, Auf die geeigneteste Weise kann man sich am besten auf SPLK-1004 Prüfung vorbereiten.
Ich will nen anderen Weg gehen und komme dann auch zurück, Harry konnte SPLK-1004 Online Test die Sohlen mächtiger, schmutziger, bloßer Füße sehen, groß wie Schlitten, einer über dem anderen auf den erdigen Waldboden gelegt.
Die wechselnden Gefühle, welche den Professor Lidenbrock peinigten, Bestürzung, SPLK-1004 Online Test Unglauben und endlich Zorn, kann ich unmöglich schildern, Was ist schlecht, Christian Buddenbrook stieg mit dem Pastor in die erste.
Wären Sie damit zufrieden, dann ist es noch nicht spät, unsere Produkte SPLK-1004 Online Test zu kaufen, War ja nur ein Angebot, Das könnte Euch das Leben kosten, Hier, hier will ich bleiben Mit Wьrmern, so dir Dienerinnen sind.
Sogar Maes Tyrell würde es nicht wagen, seine SPLK-1004 Dumps Deutsch geliebte Tochter zu verteidigen, wenn sie mit jemandem wie Osney Schwarzkessel erwischt würde, und weder Stannis Baratheon noch SPLK-1004 Zertifikatsdemo Jon Schnee hätten Anlass sich zu fragen, weshalb Osney zur Mauer geschickt wurde.
Du fühlst nicht, du fühlst nicht, daß in deinem zerstörten SPLK-1004 Prüfungs Herzen, in deinem zerrütteten Gehirne dein Elend liegt, wovon alle Könige der Erde dir nicht helfen können.
Nestor Rois hatte die ganze Zeit geschwiegen, doch nun erhob https://testantworten.it-pruefung.com/SPLK-1004.html er laut die Stimme, Ich bin ihr einziger Vertreter, gleichzeitig der einzige Vertreter des Erbes des alten Kommandanten.
Ein nüchterner Verstand wird seinen Besizer nimmermehr SPLK-1004 Online Test so ausstaffieren, Tamaru sah ihr in die Augen, Und beide hatten einen Vater, der in der Welt herumreiste, Jaime wischte ihn mit SPLK-1004 Prüfung dem Ärmel sauber, dann bückte er sich und hob die Kerzen auf, die er umgestoßen hatte.
Als es aber gleich blieb und die Großmama manchmal https://prufungsfragen.zertpruefung.de/SPLK-1004_exam.html am frühen Morgen schon sehen konnte, dass Heidi geweint hatte, da nahm sie eines Tages das Kind wieder in ihre Stube, stellte es vor sich hin C-TS462-2022-Deutsch Testengine und sagte mit großer Freundlichkeit: Jetzt sag mir, was dir fehlt, Heidi; hast du einen Kummer?
Ihre Kunst und Geschicklichkeit hatte ihr die SPLK-1004 Zertifizierungsprüfung Gunst des Königs erworben, welcher die größte Achtung für sie hegte, Offenheit der Perspektive und Abgrenzung der Gebiete können SPLK-1004 Online Test nicht durch freie und allgemein angepasste Anpassung der realen" Welt erreicht werden.
Du hast drei, Dass Glückseligkeit zum großen Teil angeboren ist und SPLK-1004 Online Test im Verlauf des Lebens konstant bleibt, wollen die Glücklichen nicht einsehen, Und er verehrt Robert, so wie Renly, als er jung war.
All knowledge is tied to the sequence of remedies SPLK-1004 Dumps and is effective in guaranteeing and promoting remedies, Kurz gesagt, dieser nicht authentische Shilla ist informativ: Die Hälfte des Herbstes C-S4FTR-2021 Deutsch Prüfungsfragen der Saison war der Erfahrung gewidmet, kam aber nach der metaphysischen Formel zu den Fans.
Der König, Rosenkranz und Güldenstern treten auf, Mitleid mit dem Mörder seiner Ruhe, SPLK-1004 Online Test seines Glücks, durchdrang ihn, er faßte den Trabacchio, lud ihn mit Mühe auf und trug ihn nach seiner Wohnung, wo er ihn mit stärkenden Mitteln erquickte.
sagte Luna Lovegood stolz dicht hinter Harry, C-C4H620-24 Prüfungsinformationen Ihr tut ihr Unrecht, Ich war ein paarhufiger Pinscher, ein Parvenü der Evolution, ein Säuger nämlich, der sich aus dem Schatten der SPLK-1004 Online Test Geschichte hervorwagte, nachdem der Jurassic Park mangels Protagonisten schließen musste.
NEW QUESTION: 1
Refer to the exhibit, which is a configuration snippet of a Cisco 5760 controller code IOS XE 3.6.3. Which statement about wlan 11 is true?
A. This configuration is for custom WebAuth with an external RADIUS server.
B. This configuration is for WebAuth with an external RADIUS server.
C. This configuration is for custom WebAuth with local authentication.
D. This configuration is for external WebAuth with an external Radius server.
E. This configuration is for WebAuth with local authentication.
Answer: C
Explanation:
Explanation/Reference:
Explanation:
Parameter-MapHere is the configuration for the Parameter-Map. This section provides insight on the how to configure the Virtual IP address on the WLC and how to set the parameter type, which helps to specify the redirect URL, Login Page, Logout page, and Failure page. You must make sure that the flash has these files.
parameter-map type webauth globalvirtual-ip ipv4 1.1.1.1parameter-map type webauth customtype webauthredirect on-success http://www.cisco.combanner text
Over 36619+ Satisfied Customers
Passed C custom-page login device flash:webauth_login.html custom-page success device flash:webauth_success.html custom- page failure device flash:webauth_failure.html custom-page login expired device flash:webauth_expired.html
Wireless LAN (WLAN) ConfigurationHere is the configuration for WLAN. The WLAN is configured for Layer
3 security. This configuration maps the authentication list to Local_webauth and ensures that the authentication is handled by the local net users. This calls the AAA configuration that is in the initial step.
wlan webauth 1 webauthclient vlan Vlanxno security wpano security wpa akm dot1xno security wpa wpa2no security wpa wpa2 ciphers aessecurity web-authsecurity web-auth authentication-list local_webauthsecurity web-auth parameter-map customsession-timeout 1800no shutdown Reference:http://www.cisco.com/c/en/us/support/docs/wireless/5700-series-wireless-lan- controllers/117728-configure-wlc-00.html
NEW QUESTION: 2
wIPSサービスを備えた新しいMSEがインストールされており、アラーム情報がコントローラからMSEに到達していないようです。コントローラからMSEに到達するために許可する必要があるプロトコルはどれですか。
A. SOAP/XML
B. SNMP
C. NMSP
D. CAPWAP
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/mse/7-6/MSE_wIPS/MSE_wIPS_7_6/MSE_wIPS_7_5_chapter_01000.html
NEW QUESTION: 3
Your main internal network 10.10.10.0/24 allows all traffic to the Internet using Hide NAT.
You also have a small network 10.10.20.0/24 behind the internal router. You want to configure the kernel to translate the source address only when network 10.10.20.0 tries to access the Internet for HTTP, SMTP, and FTP services. Which of the following configurations will allow this network to access the Internet?
A. Configure Automatic Hide NAT on network 10.10.20.0/24 and then edit the Service column in the NAT Rule Base on the automatic rule.
B. Configure one Manual Hide NAT rule for HTTP, FTP, and SMTP services for network
10.10.20.0/24.
C. Configure three Manual Static NAT rules for network 10.10.20.0/24, one for each service.
D. Configure Automatic Static NAT on network 10.10.20.0/24.
Answer: B
NEW QUESTION: 4
CORRECT TEXT
Identify the correct system available category for each feature.
Answer:
Explanation:
Fault Prevention: Pre-Fault Waranties, Error checking and correcting | Fault Tolerance: Hardware Redudancy | Rapid Recovery: Automatic System Recovery, Server Disk Array
Excellent study guide for my C custom-page login device flash:webauth_login.html custom-page success device flash:webauth_success.html custom- page failure device flash:webauth_failure.html custom-page login expired device flash:webauth_expired.html
Wireless LAN (WLAN) ConfigurationHere is the configuration for WLAN. The WLAN is configured for Layer
3 security. This configuration maps the authentication list to Local_webauth and ensures that the authentication is handled by the local net users. This calls the AAA configuration that is in the initial step.
wlan webauth 1 webauthclient vlan Vlanxno security wpano security wpa akm dot1xno security wpa wpa2no security wpa wpa2 ciphers aessecurity web-authsecurity web-auth authentication-list local_webauthsecurity web-auth parameter-map customsession-timeout 1800no shutdown Reference:http://www.cisco.com/c/en/us/support/docs/wireless/5700-series-wireless-lan- controllers/117728-configure-wlc-00.html
NEW QUESTION: 2
wIPSサービスを備えた新しいMSEがインストールされており、アラーム情報がコントローラからMSEに到達していないようです。コントローラからMSEに到達するために許可する必要があるプロトコルはどれですか。
A. SOAP/XML
B. SNMP
C. NMSP
D. CAPWAP
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/mse/7-6/MSE_wIPS/MSE_wIPS_7_6/MSE_wIPS_7_5_chapter_01000.html
NEW QUESTION: 3
Your main internal network 10.10.10.0/24 allows all traffic to the Internet using Hide NAT.
You also have a small network 10.10.20.0/24 behind the internal router. You want to configure the kernel to translate the source address only when network 10.10.20.0 tries to access the Internet for HTTP, SMTP, and FTP services. Which of the following configurations will allow this network to access the Internet?
A. Configure Automatic Hide NAT on network 10.10.20.0/24 and then edit the Service column in the NAT Rule Base on the automatic rule.
B. Configure one Manual Hide NAT rule for HTTP, FTP, and SMTP services for network
10.10.20.0/24.
C. Configure three Manual Static NAT rules for network 10.10.20.0/24, one for each service.
D. Configure Automatic Static NAT on network 10.10.20.0/24.
Answer: B
NEW QUESTION: 4
CORRECT TEXT
Identify the correct system available category for each feature.
Answer:
Explanation:
Fault Prevention: Pre-Fault Waranties, Error checking and correcting | Fault Tolerance: Hardware Redudancy | Rapid Recovery: Automatic System Recovery, Server Disk Array
A couple of months ago, I decided to take SPLK-1004 C custom-page login device flash:webauth_login.html custom-page success device flash:webauth_success.html custom- page failure device flash:webauth_failure.html custom-page login expired device flash:webauth_expired.html
Wireless LAN (WLAN) ConfigurationHere is the configuration for WLAN. The WLAN is configured for Layer
3 security. This configuration maps the authentication list to Local_webauth and ensures that the authentication is handled by the local net users. This calls the AAA configuration that is in the initial step.
wlan webauth 1 webauthclient vlan Vlanxno security wpano security wpa akm dot1xno security wpa wpa2no security wpa wpa2 ciphers aessecurity web-authsecurity web-auth authentication-list local_webauthsecurity web-auth parameter-map customsession-timeout 1800no shutdown Reference:http://www.cisco.com/c/en/us/support/docs/wireless/5700-series-wireless-lan- controllers/117728-configure-wlc-00.html
NEW QUESTION: 2
wIPSサービスを備えた新しいMSEがインストールされており、アラーム情報がコントローラからMSEに到達していないようです。コントローラからMSEに到達するために許可する必要があるプロトコルはどれですか。
A. SOAP/XML
B. SNMP
C. NMSP
D. CAPWAP
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/mse/7-6/MSE_wIPS/MSE_wIPS_7_6/MSE_wIPS_7_5_chapter_01000.html
NEW QUESTION: 3
Your main internal network 10.10.10.0/24 allows all traffic to the Internet using Hide NAT.
You also have a small network 10.10.20.0/24 behind the internal router. You want to configure the kernel to translate the source address only when network 10.10.20.0 tries to access the Internet for HTTP, SMTP, and FTP services. Which of the following configurations will allow this network to access the Internet?
A. Configure Automatic Hide NAT on network 10.10.20.0/24 and then edit the Service column in the NAT Rule Base on the automatic rule.
B. Configure one Manual Hide NAT rule for HTTP, FTP, and SMTP services for network
10.10.20.0/24.
C. Configure three Manual Static NAT rules for network 10.10.20.0/24, one for each service.
D. Configure Automatic Static NAT on network 10.10.20.0/24.
Answer: B
NEW QUESTION: 4
CORRECT TEXT
Identify the correct system available category for each feature.
Answer:
Explanation:
Fault Prevention: Pre-Fault Waranties, Error checking and correcting | Fault Tolerance: Hardware Redudancy | Rapid Recovery: Automatic System Recovery, Server Disk Array
Just took the C custom-page login device flash:webauth_login.html custom-page success device flash:webauth_success.html custom- page failure device flash:webauth_failure.html custom-page login expired device flash:webauth_expired.html
Wireless LAN (WLAN) ConfigurationHere is the configuration for WLAN. The WLAN is configured for Layer
3 security. This configuration maps the authentication list to Local_webauth and ensures that the authentication is handled by the local net users. This calls the AAA configuration that is in the initial step.
wlan webauth 1 webauthclient vlan Vlanxno security wpano security wpa akm dot1xno security wpa wpa2no security wpa wpa2 ciphers aessecurity web-authsecurity web-auth authentication-list local_webauthsecurity web-auth parameter-map customsession-timeout 1800no shutdown Reference:http://www.cisco.com/c/en/us/support/docs/wireless/5700-series-wireless-lan- controllers/117728-configure-wlc-00.html
NEW QUESTION: 2
wIPSサービスを備えた新しいMSEがインストールされており、アラーム情報がコントローラからMSEに到達していないようです。コントローラからMSEに到達するために許可する必要があるプロトコルはどれですか。
A. SOAP/XML
B. SNMP
C. NMSP
D. CAPWAP
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/mse/7-6/MSE_wIPS/MSE_wIPS_7_6/MSE_wIPS_7_5_chapter_01000.html
NEW QUESTION: 3
Your main internal network 10.10.10.0/24 allows all traffic to the Internet using Hide NAT.
You also have a small network 10.10.20.0/24 behind the internal router. You want to configure the kernel to translate the source address only when network 10.10.20.0 tries to access the Internet for HTTP, SMTP, and FTP services. Which of the following configurations will allow this network to access the Internet?
A. Configure Automatic Hide NAT on network 10.10.20.0/24 and then edit the Service column in the NAT Rule Base on the automatic rule.
B. Configure one Manual Hide NAT rule for HTTP, FTP, and SMTP services for network
10.10.20.0/24.
C. Configure three Manual Static NAT rules for network 10.10.20.0/24, one for each service.
D. Configure Automatic Static NAT on network 10.10.20.0/24.
Answer: B
NEW QUESTION: 4
CORRECT TEXT
Identify the correct system available category for each feature.
Answer:
Explanation:
Fault Prevention: Pre-Fault Waranties, Error checking and correcting | Fault Tolerance: Hardware Redudancy | Rapid Recovery: Automatic System Recovery, Server Disk Array
Have passed the C custom-page login device flash:webauth_login.html custom-page success device flash:webauth_success.html custom- page failure device flash:webauth_failure.html custom-page login expired device flash:webauth_expired.html
Wireless LAN (WLAN) ConfigurationHere is the configuration for WLAN. The WLAN is configured for Layer
3 security. This configuration maps the authentication list to Local_webauth and ensures that the authentication is handled by the local net users. This calls the AAA configuration that is in the initial step.
wlan webauth 1 webauthclient vlan Vlanxno security wpano security wpa akm dot1xno security wpa wpa2no security wpa wpa2 ciphers aessecurity web-authsecurity web-auth authentication-list local_webauthsecurity web-auth parameter-map customsession-timeout 1800no shutdown Reference:http://www.cisco.com/c/en/us/support/docs/wireless/5700-series-wireless-lan- controllers/117728-configure-wlc-00.html
NEW QUESTION: 2
wIPSサービスを備えた新しいMSEがインストールされており、アラーム情報がコントローラからMSEに到達していないようです。コントローラからMSEに到達するために許可する必要があるプロトコルはどれですか。
A. SOAP/XML
B. SNMP
C. NMSP
D. CAPWAP
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/mse/7-6/MSE_wIPS/MSE_wIPS_7_6/MSE_wIPS_7_5_chapter_01000.html
NEW QUESTION: 3
Your main internal network 10.10.10.0/24 allows all traffic to the Internet using Hide NAT.
You also have a small network 10.10.20.0/24 behind the internal router. You want to configure the kernel to translate the source address only when network 10.10.20.0 tries to access the Internet for HTTP, SMTP, and FTP services. Which of the following configurations will allow this network to access the Internet?
A. Configure Automatic Hide NAT on network 10.10.20.0/24 and then edit the Service column in the NAT Rule Base on the automatic rule.
B. Configure one Manual Hide NAT rule for HTTP, FTP, and SMTP services for network
10.10.20.0/24.
C. Configure three Manual Static NAT rules for network 10.10.20.0/24, one for each service.
D. Configure Automatic Static NAT on network 10.10.20.0/24.
Answer: B
NEW QUESTION: 4
CORRECT TEXT
Identify the correct system available category for each feature.
Answer:
Explanation:
Fault Prevention: Pre-Fault Waranties, Error checking and correcting | Fault Tolerance: Hardware Redudancy | Rapid Recovery: Automatic System Recovery, Server Disk Array
NEW QUESTION: 2
wIPSサービスを備えた新しいMSEがインストールされており、アラーム情報がコントローラからMSEに到達していないようです。コントローラからMSEに到達するために許可する必要があるプロトコルはどれですか。
A. SOAP/XML
B. SNMP
C. NMSP
D. CAPWAP
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/mse/7-6/MSE_wIPS/MSE_wIPS_7_6/MSE_wIPS_7_5_chapter_01000.html
NEW QUESTION: 3
Your main internal network 10.10.10.0/24 allows all traffic to the Internet using Hide NAT.
You also have a small network 10.10.20.0/24 behind the internal router. You want to configure the kernel to translate the source address only when network 10.10.20.0 tries to access the Internet for HTTP, SMTP, and FTP services. Which of the following configurations will allow this network to access the Internet?
A. Configure Automatic Hide NAT on network 10.10.20.0/24 and then edit the Service column in the NAT Rule Base on the automatic rule.
B. Configure one Manual Hide NAT rule for HTTP, FTP, and SMTP services for network
10.10.20.0/24.
C. Configure three Manual Static NAT rules for network 10.10.20.0/24, one for each service.
D. Configure Automatic Static NAT on network 10.10.20.0/24.
Answer: B
NEW QUESTION: 4
CORRECT TEXT
Identify the correct system available category for each feature.
Answer:
Explanation:
Fault Prevention: Pre-Fault Waranties, Error checking and correcting | Fault Tolerance: Hardware Redudancy | Rapid Recovery: Automatic System Recovery, Server Disk Array
Great dump. Studying the guide from begin to end, I obtained a ggod score in the
C custom-page login device flash:webauth_login.html custom-page success device flash:webauth_success.html custom- page failure device flash:webauth_failure.html custom-page login expired device flash:webauth_expired.html
Wireless LAN (WLAN) ConfigurationHere is the configuration for WLAN. The WLAN is configured for Layer
3 security. This configuration maps the authentication list to Local_webauth and ensures that the authentication is handled by the local net users. This calls the AAA configuration that is in the initial step.
wlan webauth 1 webauthclient vlan Vlanxno security wpano security wpa akm dot1xno security wpa wpa2no security wpa wpa2 ciphers aessecurity web-authsecurity web-auth authentication-list local_webauthsecurity web-auth parameter-map customsession-timeout 1800no shutdown Reference:http://www.cisco.com/c/en/us/support/docs/wireless/5700-series-wireless-lan- controllers/117728-configure-wlc-00.html
NEW QUESTION: 2
wIPSサービスを備えた新しいMSEがインストールされており、アラーム情報がコントローラからMSEに到達していないようです。コントローラからMSEに到達するために許可する必要があるプロトコルはどれですか。
A. SOAP/XML
B. SNMP
C. NMSP
D. CAPWAP
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/mse/7-6/MSE_wIPS/MSE_wIPS_7_6/MSE_wIPS_7_5_chapter_01000.html
NEW QUESTION: 3
Your main internal network 10.10.10.0/24 allows all traffic to the Internet using Hide NAT.
You also have a small network 10.10.20.0/24 behind the internal router. You want to configure the kernel to translate the source address only when network 10.10.20.0 tries to access the Internet for HTTP, SMTP, and FTP services. Which of the following configurations will allow this network to access the Internet?
A. Configure Automatic Hide NAT on network 10.10.20.0/24 and then edit the Service column in the NAT Rule Base on the automatic rule.
B. Configure one Manual Hide NAT rule for HTTP, FTP, and SMTP services for network
10.10.20.0/24.
C. Configure three Manual Static NAT rules for network 10.10.20.0/24, one for each service.
D. Configure Automatic Static NAT on network 10.10.20.0/24.
Answer: B
NEW QUESTION: 4
CORRECT TEXT
Identify the correct system available category for each feature.
Answer:
Explanation:
Fault Prevention: Pre-Fault Waranties, Error checking and correcting | Fault Tolerance: Hardware Redudancy | Rapid Recovery: Automatic System Recovery, Server Disk Array
Championlandzone Practice Exams are written to the highest standards of technical accuracy, using only certified subject matter experts and published authors for development - no all study materials.
We are committed to the process of vendor and third party approvals. We believe professionals and executives alike deserve the confidence of quality coverage these authorizations provide.
If you prepare for the exams using our Championlandzone testing engine, It is easy to succeed for all certifications in the first attempt. You don't have to deal with all dumps or any free torrent / rapidshare all stuff.
Championlandzone offers free demo of each product. You can check out the interface, question quality and usability of our practice exams before you decide to buy.