Wireless LAN (WLAN) ConfigurationHere is the configuration for WLAN. The WLAN is configured for Layer
3 security. This configuration maps the authentication list to Local_webauth and ensures that the authentication is handled by the local net users. This calls the AAA configuration that is in the initial step.
wlan webauth 1 webauthclient vlan Vlanxno security wpano security wpa akm dot1xno security wpa wpa2no security wpa wpa2 ciphers aessecurity web-authsecurity web-auth authentication-list local_webauthsecurity web-auth parameter-map customsession-timeout 1800no shutdown Reference:http://www.cisco.com/c/en/us/support/docs/wireless/5700-series-wireless-lan- controllers/117728-configure-wlc-00.html
NEW QUESTION: 2
wIPSサービスを備えた新しいMSEがインストールされており、アラーム情報がコントローラからMSEに到達していないようです。コントローラからMSEに到達するために許可する必要があるプロトコルはどれですか。
A. NMSP
B. SNMP
C. SOAP/XML
D. CAPWAP
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/mse/7-6/MSE_wIPS/MSE_wIPS_7_6/MSE_wIPS_7_5_chapter_01000.html
NEW QUESTION: 3
Your main internal network 10.10.10.0/24 allows all traffic to the Internet using Hide NAT.
You also have a small network 10.10.20.0/24 behind the internal router. You want to configure the kernel to translate the source address only when network 10.10.20.0 tries to access the Internet for HTTP, SMTP, and FTP services. Which of the following configurations will allow this network to access the Internet?
A. Configure three Manual Static NAT rules for network 10.10.20.0/24, one for each service.
B. Configure Automatic Hide NAT on network 10.10.20.0/24 and then edit the Service column in the NAT Rule Base on the automatic rule.
C. Configure one Manual Hide NAT rule for HTTP, FTP, and SMTP services for network
10.10.20.0/24.
D. Configure Automatic Static NAT on network 10.10.20.0/24.
Answer: C
NEW QUESTION: 4
CORRECT TEXT
Identify the correct system available category for each feature.
Answer:
Explanation:
Fault Prevention: Pre-Fault Waranties, Error checking and correcting | Fault Tolerance: Hardware Redudancy | Rapid Recovery: Automatic System Recovery, Server Disk Array
NEW QUESTION: 2
wIPSサービスを備えた新しいMSEがインストールされており、アラーム情報がコントローラからMSEに到達していないようです。コントローラからMSEに到達するために許可する必要があるプロトコルはどれですか。
A. NMSP
B. SNMP
C. SOAP/XML
D. CAPWAP
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/mse/7-6/MSE_wIPS/MSE_wIPS_7_6/MSE_wIPS_7_5_chapter_01000.html
NEW QUESTION: 3
Your main internal network 10.10.10.0/24 allows all traffic to the Internet using Hide NAT.
You also have a small network 10.10.20.0/24 behind the internal router. You want to configure the kernel to translate the source address only when network 10.10.20.0 tries to access the Internet for HTTP, SMTP, and FTP services. Which of the following configurations will allow this network to access the Internet?
A. Configure three Manual Static NAT rules for network 10.10.20.0/24, one for each service.
B. Configure Automatic Hide NAT on network 10.10.20.0/24 and then edit the Service column in the NAT Rule Base on the automatic rule.
C. Configure one Manual Hide NAT rule for HTTP, FTP, and SMTP services for network
10.10.20.0/24.
D. Configure Automatic Static NAT on network 10.10.20.0/24.
Answer: C
NEW QUESTION: 4
CORRECT TEXT
Identify the correct system available category for each feature.
Answer:
Explanation:
Fault Prevention: Pre-Fault Waranties, Error checking and correcting | Fault Tolerance: Hardware Redudancy | Rapid Recovery: Automatic System Recovery, Server Disk Array
NEW QUESTION: 2
wIPSサービスを備えた新しいMSEがインストールされており、アラーム情報がコントローラからMSEに到達していないようです。コントローラからMSEに到達するために許可する必要があるプロトコルはどれですか。
A. NMSP
B. SNMP
C. SOAP/XML
D. CAPWAP
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/mse/7-6/MSE_wIPS/MSE_wIPS_7_6/MSE_wIPS_7_5_chapter_01000.html
NEW QUESTION: 3
Your main internal network 10.10.10.0/24 allows all traffic to the Internet using Hide NAT.
You also have a small network 10.10.20.0/24 behind the internal router. You want to configure the kernel to translate the source address only when network 10.10.20.0 tries to access the Internet for HTTP, SMTP, and FTP services. Which of the following configurations will allow this network to access the Internet?
A. Configure three Manual Static NAT rules for network 10.10.20.0/24, one for each service.
B. Configure Automatic Hide NAT on network 10.10.20.0/24 and then edit the Service column in the NAT Rule Base on the automatic rule.
C. Configure one Manual Hide NAT rule for HTTP, FTP, and SMTP services for network
10.10.20.0/24.
D. Configure Automatic Static NAT on network 10.10.20.0/24.
Answer: C
NEW QUESTION: 4
CORRECT TEXT
Identify the correct system available category for each feature.
Answer:
Explanation:
Fault Prevention: Pre-Fault Waranties, Error checking and correcting | Fault Tolerance: Hardware Redudancy | Rapid Recovery: Automatic System Recovery, Server Disk Array
NEW QUESTION: 2
wIPSサービスを備えた新しいMSEがインストールされており、アラーム情報がコントローラからMSEに到達していないようです。コントローラからMSEに到達するために許可する必要があるプロトコルはどれですか。
A. NMSP
B. SNMP
C. SOAP/XML
D. CAPWAP
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/mse/7-6/MSE_wIPS/MSE_wIPS_7_6/MSE_wIPS_7_5_chapter_01000.html
NEW QUESTION: 3
Your main internal network 10.10.10.0/24 allows all traffic to the Internet using Hide NAT.
You also have a small network 10.10.20.0/24 behind the internal router. You want to configure the kernel to translate the source address only when network 10.10.20.0 tries to access the Internet for HTTP, SMTP, and FTP services. Which of the following configurations will allow this network to access the Internet?
A. Configure three Manual Static NAT rules for network 10.10.20.0/24, one for each service.
B. Configure Automatic Hide NAT on network 10.10.20.0/24 and then edit the Service column in the NAT Rule Base on the automatic rule.
C. Configure one Manual Hide NAT rule for HTTP, FTP, and SMTP services for network
10.10.20.0/24.
D. Configure Automatic Static NAT on network 10.10.20.0/24.
Answer: C
NEW QUESTION: 4
CORRECT TEXT
Identify the correct system available category for each feature.
Answer:
Explanation:
Fault Prevention: Pre-Fault Waranties, Error checking and correcting | Fault Tolerance: Hardware Redudancy | Rapid Recovery: Automatic System Recovery, Server Disk Array
NEW QUESTION: 2
wIPSサービスを備えた新しいMSEがインストールされており、アラーム情報がコントローラからMSEに到達していないようです。コントローラからMSEに到達するために許可する必要があるプロトコルはどれですか。
A. NMSP
B. SNMP
C. SOAP/XML
D. CAPWAP
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/mse/7-6/MSE_wIPS/MSE_wIPS_7_6/MSE_wIPS_7_5_chapter_01000.html
NEW QUESTION: 3
Your main internal network 10.10.10.0/24 allows all traffic to the Internet using Hide NAT.
You also have a small network 10.10.20.0/24 behind the internal router. You want to configure the kernel to translate the source address only when network 10.10.20.0 tries to access the Internet for HTTP, SMTP, and FTP services. Which of the following configurations will allow this network to access the Internet?
A. Configure three Manual Static NAT rules for network 10.10.20.0/24, one for each service.
B. Configure Automatic Hide NAT on network 10.10.20.0/24 and then edit the Service column in the NAT Rule Base on the automatic rule.
C. Configure one Manual Hide NAT rule for HTTP, FTP, and SMTP services for network
10.10.20.0/24.
D. Configure Automatic Static NAT on network 10.10.20.0/24.
Answer: C
NEW QUESTION: 4
CORRECT TEXT
Identify the correct system available category for each feature.
Answer:
Explanation:
Fault Prevention: Pre-Fault Waranties, Error checking and correcting | Fault Tolerance: Hardware Redudancy | Rapid Recovery: Automatic System Recovery, Server Disk Array
NEW QUESTION: 2
wIPSサービスを備えた新しいMSEがインストールされており、アラーム情報がコントローラからMSEに到達していないようです。コントローラからMSEに到達するために許可する必要があるプロトコルはどれですか。
A. NMSP
B. SNMP
C. SOAP/XML
D. CAPWAP
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/mse/7-6/MSE_wIPS/MSE_wIPS_7_6/MSE_wIPS_7_5_chapter_01000.html
NEW QUESTION: 3
Your main internal network 10.10.10.0/24 allows all traffic to the Internet using Hide NAT.
You also have a small network 10.10.20.0/24 behind the internal router. You want to configure the kernel to translate the source address only when network 10.10.20.0 tries to access the Internet for HTTP, SMTP, and FTP services. Which of the following configurations will allow this network to access the Internet?
A. Configure three Manual Static NAT rules for network 10.10.20.0/24, one for each service.
B. Configure Automatic Hide NAT on network 10.10.20.0/24 and then edit the Service column in the NAT Rule Base on the automatic rule.
C. Configure one Manual Hide NAT rule for HTTP, FTP, and SMTP services for network
10.10.20.0/24.
D. Configure Automatic Static NAT on network 10.10.20.0/24.
Answer: C
NEW QUESTION: 4
CORRECT TEXT
Identify the correct system available category for each feature.
Answer:
Explanation:
Fault Prevention: Pre-Fault Waranties, Error checking and correcting | Fault Tolerance: Hardware Redudancy | Rapid Recovery: Automatic System Recovery, Server Disk Array
NEW QUESTION: 2
wIPSサービスを備えた新しいMSEがインストールされており、アラーム情報がコントローラからMSEに到達していないようです。コントローラからMSEに到達するために許可する必要があるプロトコルはどれですか。
A. NMSP
B. SNMP
C. SOAP/XML
D. CAPWAP
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/mse/7-6/MSE_wIPS/MSE_wIPS_7_6/MSE_wIPS_7_5_chapter_01000.html
NEW QUESTION: 3
Your main internal network 10.10.10.0/24 allows all traffic to the Internet using Hide NAT.
You also have a small network 10.10.20.0/24 behind the internal router. You want to configure the kernel to translate the source address only when network 10.10.20.0 tries to access the Internet for HTTP, SMTP, and FTP services. Which of the following configurations will allow this network to access the Internet?
A. Configure three Manual Static NAT rules for network 10.10.20.0/24, one for each service.
B. Configure Automatic Hide NAT on network 10.10.20.0/24 and then edit the Service column in the NAT Rule Base on the automatic rule.
C. Configure one Manual Hide NAT rule for HTTP, FTP, and SMTP services for network
10.10.20.0/24.
D. Configure Automatic Static NAT on network 10.10.20.0/24.
Answer: C
NEW QUESTION: 4
CORRECT TEXT
Identify the correct system available category for each feature.
Answer:
Explanation:
Fault Prevention: Pre-Fault Waranties, Error checking and correcting | Fault Tolerance: Hardware Redudancy | Rapid Recovery: Automatic System Recovery, Server Disk Array
NEW QUESTION: 2
wIPSサービスを備えた新しいMSEがインストールされており、アラーム情報がコントローラからMSEに到達していないようです。コントローラからMSEに到達するために許可する必要があるプロトコルはどれですか。
A. NMSP
B. SNMP
C. SOAP/XML
D. CAPWAP
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/mse/7-6/MSE_wIPS/MSE_wIPS_7_6/MSE_wIPS_7_5_chapter_01000.html
NEW QUESTION: 3
Your main internal network 10.10.10.0/24 allows all traffic to the Internet using Hide NAT.
You also have a small network 10.10.20.0/24 behind the internal router. You want to configure the kernel to translate the source address only when network 10.10.20.0 tries to access the Internet for HTTP, SMTP, and FTP services. Which of the following configurations will allow this network to access the Internet?
A. Configure three Manual Static NAT rules for network 10.10.20.0/24, one for each service.
B. Configure Automatic Hide NAT on network 10.10.20.0/24 and then edit the Service column in the NAT Rule Base on the automatic rule.
C. Configure one Manual Hide NAT rule for HTTP, FTP, and SMTP services for network
10.10.20.0/24.
D. Configure Automatic Static NAT on network 10.10.20.0/24.
Answer: C
NEW QUESTION: 4
CORRECT TEXT
Identify the correct system available category for each feature.
Answer:
Explanation:
Fault Prevention: Pre-Fault Waranties, Error checking and correcting | Fault Tolerance: Hardware Redudancy | Rapid Recovery: Automatic System Recovery, Server Disk Array
NEW QUESTION: 2
wIPSサービスを備えた新しいMSEがインストールされており、アラーム情報がコントローラからMSEに到達していないようです。コントローラからMSEに到達するために許可する必要があるプロトコルはどれですか。
A. NMSP
B. SNMP
C. SOAP/XML
D. CAPWAP
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/mse/7-6/MSE_wIPS/MSE_wIPS_7_6/MSE_wIPS_7_5_chapter_01000.html
NEW QUESTION: 3
Your main internal network 10.10.10.0/24 allows all traffic to the Internet using Hide NAT.
You also have a small network 10.10.20.0/24 behind the internal router. You want to configure the kernel to translate the source address only when network 10.10.20.0 tries to access the Internet for HTTP, SMTP, and FTP services. Which of the following configurations will allow this network to access the Internet?
A. Configure three Manual Static NAT rules for network 10.10.20.0/24, one for each service.
B. Configure Automatic Hide NAT on network 10.10.20.0/24 and then edit the Service column in the NAT Rule Base on the automatic rule.
C. Configure one Manual Hide NAT rule for HTTP, FTP, and SMTP services for network
10.10.20.0/24.
D. Configure Automatic Static NAT on network 10.10.20.0/24.
Answer: C
NEW QUESTION: 4
CORRECT TEXT
Identify the correct system available category for each feature.
Answer:
Explanation:
Fault Prevention: Pre-Fault Waranties, Error checking and correcting | Fault Tolerance: Hardware Redudancy | Rapid Recovery: Automatic System Recovery, Server Disk Array
NEW QUESTION: 2
wIPSサービスを備えた新しいMSEがインストールされており、アラーム情報がコントローラからMSEに到達していないようです。コントローラからMSEに到達するために許可する必要があるプロトコルはどれですか。
A. NMSP
B. SNMP
C. SOAP/XML
D. CAPWAP
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/mse/7-6/MSE_wIPS/MSE_wIPS_7_6/MSE_wIPS_7_5_chapter_01000.html
NEW QUESTION: 3
Your main internal network 10.10.10.0/24 allows all traffic to the Internet using Hide NAT.
You also have a small network 10.10.20.0/24 behind the internal router. You want to configure the kernel to translate the source address only when network 10.10.20.0 tries to access the Internet for HTTP, SMTP, and FTP services. Which of the following configurations will allow this network to access the Internet?
A. Configure three Manual Static NAT rules for network 10.10.20.0/24, one for each service.
B. Configure Automatic Hide NAT on network 10.10.20.0/24 and then edit the Service column in the NAT Rule Base on the automatic rule.
C. Configure one Manual Hide NAT rule for HTTP, FTP, and SMTP services for network
10.10.20.0/24.
D. Configure Automatic Static NAT on network 10.10.20.0/24.
Answer: C
NEW QUESTION: 4
CORRECT TEXT
Identify the correct system available category for each feature.
Answer:
Explanation:
Fault Prevention: Pre-Fault Waranties, Error checking and correcting | Fault Tolerance: Hardware Redudancy | Rapid Recovery: Automatic System Recovery, Server Disk Array
NEW QUESTION: 2
wIPSサービスを備えた新しいMSEがインストールされており、アラーム情報がコントローラからMSEに到達していないようです。コントローラからMSEに到達するために許可する必要があるプロトコルはどれですか。
A. NMSP
B. SNMP
C. SOAP/XML
D. CAPWAP
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/mse/7-6/MSE_wIPS/MSE_wIPS_7_6/MSE_wIPS_7_5_chapter_01000.html
NEW QUESTION: 3
Your main internal network 10.10.10.0/24 allows all traffic to the Internet using Hide NAT.
You also have a small network 10.10.20.0/24 behind the internal router. You want to configure the kernel to translate the source address only when network 10.10.20.0 tries to access the Internet for HTTP, SMTP, and FTP services. Which of the following configurations will allow this network to access the Internet?
A. Configure three Manual Static NAT rules for network 10.10.20.0/24, one for each service.
B. Configure Automatic Hide NAT on network 10.10.20.0/24 and then edit the Service column in the NAT Rule Base on the automatic rule.
C. Configure one Manual Hide NAT rule for HTTP, FTP, and SMTP services for network
10.10.20.0/24.
D. Configure Automatic Static NAT on network 10.10.20.0/24.
Answer: C
NEW QUESTION: 4
CORRECT TEXT
Identify the correct system available category for each feature.
Answer:
Explanation:
Fault Prevention: Pre-Fault Waranties, Error checking and correcting | Fault Tolerance: Hardware Redudancy | Rapid Recovery: Automatic System Recovery, Server Disk Array
NEW QUESTION: 2
wIPSサービスを備えた新しいMSEがインストールされており、アラーム情報がコントローラからMSEに到達していないようです。コントローラからMSEに到達するために許可する必要があるプロトコルはどれですか。
A. NMSP
B. SNMP
C. SOAP/XML
D. CAPWAP
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/mse/7-6/MSE_wIPS/MSE_wIPS_7_6/MSE_wIPS_7_5_chapter_01000.html
NEW QUESTION: 3
Your main internal network 10.10.10.0/24 allows all traffic to the Internet using Hide NAT.
You also have a small network 10.10.20.0/24 behind the internal router. You want to configure the kernel to translate the source address only when network 10.10.20.0 tries to access the Internet for HTTP, SMTP, and FTP services. Which of the following configurations will allow this network to access the Internet?
A. Configure three Manual Static NAT rules for network 10.10.20.0/24, one for each service.
B. Configure Automatic Hide NAT on network 10.10.20.0/24 and then edit the Service column in the NAT Rule Base on the automatic rule.
C. Configure one Manual Hide NAT rule for HTTP, FTP, and SMTP services for network
10.10.20.0/24.
D. Configure Automatic Static NAT on network 10.10.20.0/24.
Answer: C
NEW QUESTION: 4
CORRECT TEXT
Identify the correct system available category for each feature.
Answer:
Explanation:
Fault Prevention: Pre-Fault Waranties, Error checking and correcting | Fault Tolerance: Hardware Redudancy | Rapid Recovery: Automatic System Recovery, Server Disk Array
NEW QUESTION: 2
wIPSサービスを備えた新しいMSEがインストールされており、アラーム情報がコントローラからMSEに到達していないようです。コントローラからMSEに到達するために許可する必要があるプロトコルはどれですか。
A. NMSP
B. SNMP
C. SOAP/XML
D. CAPWAP
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/mse/7-6/MSE_wIPS/MSE_wIPS_7_6/MSE_wIPS_7_5_chapter_01000.html
NEW QUESTION: 3
Your main internal network 10.10.10.0/24 allows all traffic to the Internet using Hide NAT.
You also have a small network 10.10.20.0/24 behind the internal router. You want to configure the kernel to translate the source address only when network 10.10.20.0 tries to access the Internet for HTTP, SMTP, and FTP services. Which of the following configurations will allow this network to access the Internet?
A. Configure three Manual Static NAT rules for network 10.10.20.0/24, one for each service.
B. Configure Automatic Hide NAT on network 10.10.20.0/24 and then edit the Service column in the NAT Rule Base on the automatic rule.
C. Configure one Manual Hide NAT rule for HTTP, FTP, and SMTP services for network
10.10.20.0/24.
D. Configure Automatic Static NAT on network 10.10.20.0/24.
Answer: C
NEW QUESTION: 4
CORRECT TEXT
Identify the correct system available category for each feature.
Answer:
Explanation:
Fault Prevention: Pre-Fault Waranties, Error checking and correcting | Fault Tolerance: Hardware Redudancy | Rapid Recovery: Automatic System Recovery, Server Disk Array
NEW QUESTION: 3
Your main internal network 10.10.10.0/24 allows all traffic to the Internet using Hide NAT.
You also have a small network 10.10.20.0/24 behind the internal router. You want to configure the kernel to translate the source address only when network 10.10.20.0 tries to access the Internet for HTTP, SMTP, and FTP services. Which of the following configurations will allow this network to access the Internet?
A. Configure three Manual Static NAT rules for network 10.10.20.0/24, one for each service.
B. Configure Automatic Hide NAT on network 10.10.20.0/24 and then edit the Service column in the NAT Rule Base on the automatic rule.
C. Configure one Manual Hide NAT rule for HTTP, FTP, and SMTP services for network
10.10.20.0/24.
D. Configure Automatic Static NAT on network 10.10.20.0/24.
Answer: C
NEW QUESTION: 4
CORRECT TEXT
Identify the correct system available category for each feature.
Answer:
Explanation:
Fault Prevention: Pre-Fault Waranties, Error checking and correcting | Fault Tolerance: Hardware Redudancy | Rapid Recovery: Automatic System Recovery, Server Disk Array
NEW QUESTION: 2
wIPSサービスを備えた新しいMSEがインストールされており、アラーム情報がコントローラからMSEに到達していないようです。コントローラからMSEに到達するために許可する必要があるプロトコルはどれですか。
A. NMSP
B. SNMP
C. SOAP/XML
D. CAPWAP
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/mse/7-6/MSE_wIPS/MSE_wIPS_7_6/MSE_wIPS_7_5_chapter_01000.html
NEW QUESTION: 3
Your main internal network 10.10.10.0/24 allows all traffic to the Internet using Hide NAT.
You also have a small network 10.10.20.0/24 behind the internal router. You want to configure the kernel to translate the source address only when network 10.10.20.0 tries to access the Internet for HTTP, SMTP, and FTP services. Which of the following configurations will allow this network to access the Internet?
A. Configure three Manual Static NAT rules for network 10.10.20.0/24, one for each service.
B. Configure Automatic Hide NAT on network 10.10.20.0/24 and then edit the Service column in the NAT Rule Base on the automatic rule.
C. Configure one Manual Hide NAT rule for HTTP, FTP, and SMTP services for network
10.10.20.0/24.
D. Configure Automatic Static NAT on network 10.10.20.0/24.
Answer: C
NEW QUESTION: 4
CORRECT TEXT
Identify the correct system available category for each feature.
Answer:
Explanation:
Fault Prevention: Pre-Fault Waranties, Error checking and correcting | Fault Tolerance: Hardware Redudancy | Rapid Recovery: Automatic System Recovery, Server Disk Array
NEW QUESTION: 3
Your main internal network 10.10.10.0/24 allows all traffic to the Internet using Hide NAT.
You also have a small network 10.10.20.0/24 behind the internal router. You want to configure the kernel to translate the source address only when network 10.10.20.0 tries to access the Internet for HTTP, SMTP, and FTP services. Which of the following configurations will allow this network to access the Internet?
A. Configure three Manual Static NAT rules for network 10.10.20.0/24, one for each service.
B. Configure Automatic Hide NAT on network 10.10.20.0/24 and then edit the Service column in the NAT Rule Base on the automatic rule.
C. Configure one Manual Hide NAT rule for HTTP, FTP, and SMTP services for network
10.10.20.0/24.
D. Configure Automatic Static NAT on network 10.10.20.0/24.
Answer: C
NEW QUESTION: 4
CORRECT TEXT
Identify the correct system available category for each feature.
Answer:
Explanation:
Fault Prevention: Pre-Fault Waranties, Error checking and correcting | Fault Tolerance: Hardware Redudancy | Rapid Recovery: Automatic System Recovery, Server Disk Array
Online Test Engine supports Windows / Mac / Android / iOS, etc., because it is the software based on WEB browser.
NEW QUESTION: 2
wIPSサービスを備えた新しいMSEがインストールされており、アラーム情報がコントローラからMSEに到達していないようです。コントローラからMSEに到達するために許可する必要があるプロトコルはどれですか。
A. NMSP
B. SNMP
C. SOAP/XML
D. CAPWAP
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/mse/7-6/MSE_wIPS/MSE_wIPS_7_6/MSE_wIPS_7_5_chapter_01000.html
NEW QUESTION: 3
Your main internal network 10.10.10.0/24 allows all traffic to the Internet using Hide NAT.
You also have a small network 10.10.20.0/24 behind the internal router. You want to configure the kernel to translate the source address only when network 10.10.20.0 tries to access the Internet for HTTP, SMTP, and FTP services. Which of the following configurations will allow this network to access the Internet?
A. Configure three Manual Static NAT rules for network 10.10.20.0/24, one for each service.
B. Configure Automatic Hide NAT on network 10.10.20.0/24 and then edit the Service column in the NAT Rule Base on the automatic rule.
C. Configure one Manual Hide NAT rule for HTTP, FTP, and SMTP services for network
10.10.20.0/24.
D. Configure Automatic Static NAT on network 10.10.20.0/24.
Answer: C
NEW QUESTION: 4
CORRECT TEXT
Identify the correct system available category for each feature.
Answer:
Explanation:
Fault Prevention: Pre-Fault Waranties, Error checking and correcting | Fault Tolerance: Hardware Redudancy | Rapid Recovery: Automatic System Recovery, Server Disk Array
NEW QUESTION: 2
wIPSサービスを備えた新しいMSEがインストールされており、アラーム情報がコントローラからMSEに到達していないようです。コントローラからMSEに到達するために許可する必要があるプロトコルはどれですか。
A. NMSP
B. SNMP
C. SOAP/XML
D. CAPWAP
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/mse/7-6/MSE_wIPS/MSE_wIPS_7_6/MSE_wIPS_7_5_chapter_01000.html
NEW QUESTION: 3
Your main internal network 10.10.10.0/24 allows all traffic to the Internet using Hide NAT.
You also have a small network 10.10.20.0/24 behind the internal router. You want to configure the kernel to translate the source address only when network 10.10.20.0 tries to access the Internet for HTTP, SMTP, and FTP services. Which of the following configurations will allow this network to access the Internet?
A. Configure three Manual Static NAT rules for network 10.10.20.0/24, one for each service.
B. Configure Automatic Hide NAT on network 10.10.20.0/24 and then edit the Service column in the NAT Rule Base on the automatic rule.
C. Configure one Manual Hide NAT rule for HTTP, FTP, and SMTP services for network
10.10.20.0/24.
D. Configure Automatic Static NAT on network 10.10.20.0/24.
Answer: C
NEW QUESTION: 4
CORRECT TEXT
Identify the correct system available category for each feature.
Answer:
Explanation:
Fault Prevention: Pre-Fault Waranties, Error checking and correcting | Fault Tolerance: Hardware Redudancy | Rapid Recovery: Automatic System Recovery, Server Disk Array
NEW QUESTION: 3
Your main internal network 10.10.10.0/24 allows all traffic to the Internet using Hide NAT.
You also have a small network 10.10.20.0/24 behind the internal router. You want to configure the kernel to translate the source address only when network 10.10.20.0 tries to access the Internet for HTTP, SMTP, and FTP services. Which of the following configurations will allow this network to access the Internet?
A. Configure three Manual Static NAT rules for network 10.10.20.0/24, one for each service.
B. Configure Automatic Hide NAT on network 10.10.20.0/24 and then edit the Service column in the NAT Rule Base on the automatic rule.
C. Configure one Manual Hide NAT rule for HTTP, FTP, and SMTP services for network
10.10.20.0/24.
D. Configure Automatic Static NAT on network 10.10.20.0/24.
Answer: C
NEW QUESTION: 4
CORRECT TEXT
Identify the correct system available category for each feature.
Answer:
Explanation:
Fault Prevention: Pre-Fault Waranties, Error checking and correcting | Fault Tolerance: Hardware Redudancy | Rapid Recovery: Automatic System Recovery, Server Disk Array
NEW QUESTION: 2
wIPSサービスを備えた新しいMSEがインストールされており、アラーム情報がコントローラからMSEに到達していないようです。コントローラからMSEに到達するために許可する必要があるプロトコルはどれですか。
A. NMSP
B. SNMP
C. SOAP/XML
D. CAPWAP
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/mse/7-6/MSE_wIPS/MSE_wIPS_7_6/MSE_wIPS_7_5_chapter_01000.html
NEW QUESTION: 3
Your main internal network 10.10.10.0/24 allows all traffic to the Internet using Hide NAT.
You also have a small network 10.10.20.0/24 behind the internal router. You want to configure the kernel to translate the source address only when network 10.10.20.0 tries to access the Internet for HTTP, SMTP, and FTP services. Which of the following configurations will allow this network to access the Internet?
A. Configure three Manual Static NAT rules for network 10.10.20.0/24, one for each service.
B. Configure Automatic Hide NAT on network 10.10.20.0/24 and then edit the Service column in the NAT Rule Base on the automatic rule.
C. Configure one Manual Hide NAT rule for HTTP, FTP, and SMTP services for network
10.10.20.0/24.
D. Configure Automatic Static NAT on network 10.10.20.0/24.
Answer: C
NEW QUESTION: 4
CORRECT TEXT
Identify the correct system available category for each feature.
Answer:
Explanation:
Fault Prevention: Pre-Fault Waranties, Error checking and correcting | Fault Tolerance: Hardware Redudancy | Rapid Recovery: Automatic System Recovery, Server Disk Array
NEW QUESTION: 2
wIPSサービスを備えた新しいMSEがインストールされており、アラーム情報がコントローラからMSEに到達していないようです。コントローラからMSEに到達するために許可する必要があるプロトコルはどれですか。
A. NMSP
B. SNMP
C. SOAP/XML
D. CAPWAP
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/mse/7-6/MSE_wIPS/MSE_wIPS_7_6/MSE_wIPS_7_5_chapter_01000.html
NEW QUESTION: 3
Your main internal network 10.10.10.0/24 allows all traffic to the Internet using Hide NAT.
You also have a small network 10.10.20.0/24 behind the internal router. You want to configure the kernel to translate the source address only when network 10.10.20.0 tries to access the Internet for HTTP, SMTP, and FTP services. Which of the following configurations will allow this network to access the Internet?
A. Configure three Manual Static NAT rules for network 10.10.20.0/24, one for each service.
B. Configure Automatic Hide NAT on network 10.10.20.0/24 and then edit the Service column in the NAT Rule Base on the automatic rule.
C. Configure one Manual Hide NAT rule for HTTP, FTP, and SMTP services for network
10.10.20.0/24.
D. Configure Automatic Static NAT on network 10.10.20.0/24.
Answer: C
NEW QUESTION: 4
CORRECT TEXT
Identify the correct system available category for each feature.
Answer:
Explanation:
Fault Prevention: Pre-Fault Waranties, Error checking and correcting | Fault Tolerance: Hardware Redudancy | Rapid Recovery: Automatic System Recovery, Server Disk Array
VMware 1V0-41.20 Latest Test Blueprint After diligent works, however, most of them felt tired and take a lot of time but absorb a few points, VMware 1V0-41.20 Latest Test Blueprint Maybe you are thinking someway to improve your life and future, As you can see, we are selling our 1V0-41.20 learning guide in the international market, thus there are three different versions of our 1V0-41.20 exam materials which are prepared to cater the different demands of various people, The choice is yours!
Should You Upgrade to a Smart Thermostat, We have kept all the VCTA-NV 2021 1V0-41.20 test requirements in mind while creating amazing guidelines for the Associate VMware Network Virtualization professionals.
Our company has already taken your thoughts into consideration, For E_ACTAI_2403 Valid Dumps Questions a three-week period, we captured all their conversations, Working with Tracepoints When Hit Option) Viewing Data in the Debugger.
Eric: Is D still evolving, and is there a specification, About 1V0-41.20 exam, Championlandzone has a great sound quality, will be the most trusted sources, Green—Associated with spring and newness.
The charts are also consistent in their time frame, You have forests, domains, https://pass4sure.testvalid.com/1V0-41.20-valid-exam-test.html and Organizational Units, which help to logically control your objects which are users, groups, computers, printers, and so forth) Is that all?
But alas, we missed our deadline by almost a year, Championlandzone MD-102 Reliable Exam Registration All rights reserved, Too many details bury the lesson, but attention to details distinguishes a toy from a tool.
The Wonderful World of Close-Up Lenses, However, we didn t fully retire, https://testking.itexamdownload.com/1V0-41.20-valid-questions.html Forty-eight percent took a pay cut, After diligent works, however, most of them felt tired and take a lot of time but absorb a few points.
Maybe you are thinking someway to improve your life and future, As you can see, we are selling our 1V0-41.20 learning guide in the international market, thus there are three different versions of our 1V0-41.20 exam materials which are prepared to cater the different demands of various people.
The choice is yours, The formers users have absolute trust in us and our 1V0-41.20 certification training, By giving you both the skills and exposure of your area of work, our 1V0-41.20 study guides, 1V0-41.20 dump and practice questions and answers will help you pass 1V0-41.20 certification without any problem.
We believe that if you can learn about several advantages of 1V0-41.20 preparation questions, I believe you have more understanding of the real questions and answers.
Click OK to close the two remaining dialogs, We believe you will get wonderful results with the help of our 1V0-41.20 exam questions as we have been professional in this field.
As the questions of exams of our 1V0-41.20 exam torrent are more or less involved with heated issues and customers who prepare for the exams must haven’t enough time to keep trace of exams all day long.
They can alleviate your pressure, relieve you of tremendous knowledge and master EPM-DEF Latest Mock Exam the key points with the least time, As a member of the people working in the IT industry, do you have a headache for passing some IT certification exams?
If your Associate VMware Network Virtualization actual test is coming soon, I think 1V0-41.20 free training material will be your best choice, Although our 1V0-41.20 exam braindumps have received the warm reception and quick sale from all over the world, in order to help as many workers as possible to pass the exam and get the dreaming certification successfully, we still keep a favorable price for our best 1V0-41.20 exam simulation.
No matter your negative emotions or any other trouble cannot be a fence for your goal by 1V0-41.20 test cram materials, Some sites provide VMware 1V0-41.20 exam study materials on the Internet , but they do not have any reliable guarantee.
NEW QUESTION: 1
Refer to the exhibit, which is a configuration snippet of a Cisco 5760 controller code IOS XE 3.6.3. Which statement about wlan 11 is true?
A. This configuration is for custom WebAuth with an external RADIUS server.
B. This configuration is for external WebAuth with an external Radius server.
C. This configuration is for custom WebAuth with local authentication.
D. This configuration is for WebAuth with local authentication.
E. This configuration is for WebAuth with an external RADIUS server.
Answer: C
Explanation:
Explanation/Reference:
Explanation:
Parameter-MapHere is the configuration for the Parameter-Map. This section provides insight on the how to configure the Virtual IP address on the WLC and how to set the parameter type, which helps to specify the redirect URL, Login Page, Logout page, and Failure page. You must make sure that the flash has these files.
parameter-map type webauth globalvirtual-ip ipv4 1.1.1.1parameter-map type webauth customtype webauthredirect on-success http://www.cisco.combanner text
Over 36619+ Satisfied Customers
Passed C custom-page login device flash:webauth_login.html custom-page success device flash:webauth_success.html custom- page failure device flash:webauth_failure.html custom-page login expired device flash:webauth_expired.html
Wireless LAN (WLAN) ConfigurationHere is the configuration for WLAN. The WLAN is configured for Layer
3 security. This configuration maps the authentication list to Local_webauth and ensures that the authentication is handled by the local net users. This calls the AAA configuration that is in the initial step.
wlan webauth 1 webauthclient vlan Vlanxno security wpano security wpa akm dot1xno security wpa wpa2no security wpa wpa2 ciphers aessecurity web-authsecurity web-auth authentication-list local_webauthsecurity web-auth parameter-map customsession-timeout 1800no shutdown Reference:http://www.cisco.com/c/en/us/support/docs/wireless/5700-series-wireless-lan- controllers/117728-configure-wlc-00.html
NEW QUESTION: 2
wIPSサービスを備えた新しいMSEがインストールされており、アラーム情報がコントローラからMSEに到達していないようです。コントローラからMSEに到達するために許可する必要があるプロトコルはどれですか。
A. NMSP
B. SNMP
C. SOAP/XML
D. CAPWAP
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/mse/7-6/MSE_wIPS/MSE_wIPS_7_6/MSE_wIPS_7_5_chapter_01000.html
NEW QUESTION: 3
Your main internal network 10.10.10.0/24 allows all traffic to the Internet using Hide NAT.
You also have a small network 10.10.20.0/24 behind the internal router. You want to configure the kernel to translate the source address only when network 10.10.20.0 tries to access the Internet for HTTP, SMTP, and FTP services. Which of the following configurations will allow this network to access the Internet?
A. Configure three Manual Static NAT rules for network 10.10.20.0/24, one for each service.
B. Configure Automatic Hide NAT on network 10.10.20.0/24 and then edit the Service column in the NAT Rule Base on the automatic rule.
C. Configure one Manual Hide NAT rule for HTTP, FTP, and SMTP services for network
10.10.20.0/24.
D. Configure Automatic Static NAT on network 10.10.20.0/24.
Answer: C
NEW QUESTION: 4
CORRECT TEXT
Identify the correct system available category for each feature.
Answer:
Explanation:
Fault Prevention: Pre-Fault Waranties, Error checking and correcting | Fault Tolerance: Hardware Redudancy | Rapid Recovery: Automatic System Recovery, Server Disk Array
Excellent study guide for my C custom-page login device flash:webauth_login.html custom-page success device flash:webauth_success.html custom- page failure device flash:webauth_failure.html custom-page login expired device flash:webauth_expired.html
Wireless LAN (WLAN) ConfigurationHere is the configuration for WLAN. The WLAN is configured for Layer
3 security. This configuration maps the authentication list to Local_webauth and ensures that the authentication is handled by the local net users. This calls the AAA configuration that is in the initial step.
wlan webauth 1 webauthclient vlan Vlanxno security wpano security wpa akm dot1xno security wpa wpa2no security wpa wpa2 ciphers aessecurity web-authsecurity web-auth authentication-list local_webauthsecurity web-auth parameter-map customsession-timeout 1800no shutdown Reference:http://www.cisco.com/c/en/us/support/docs/wireless/5700-series-wireless-lan- controllers/117728-configure-wlc-00.html
NEW QUESTION: 2
wIPSサービスを備えた新しいMSEがインストールされており、アラーム情報がコントローラからMSEに到達していないようです。コントローラからMSEに到達するために許可する必要があるプロトコルはどれですか。
A. NMSP
B. SNMP
C. SOAP/XML
D. CAPWAP
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/mse/7-6/MSE_wIPS/MSE_wIPS_7_6/MSE_wIPS_7_5_chapter_01000.html
NEW QUESTION: 3
Your main internal network 10.10.10.0/24 allows all traffic to the Internet using Hide NAT.
You also have a small network 10.10.20.0/24 behind the internal router. You want to configure the kernel to translate the source address only when network 10.10.20.0 tries to access the Internet for HTTP, SMTP, and FTP services. Which of the following configurations will allow this network to access the Internet?
A. Configure three Manual Static NAT rules for network 10.10.20.0/24, one for each service.
B. Configure Automatic Hide NAT on network 10.10.20.0/24 and then edit the Service column in the NAT Rule Base on the automatic rule.
C. Configure one Manual Hide NAT rule for HTTP, FTP, and SMTP services for network
10.10.20.0/24.
D. Configure Automatic Static NAT on network 10.10.20.0/24.
Answer: C
NEW QUESTION: 4
CORRECT TEXT
Identify the correct system available category for each feature.
Answer:
Explanation:
Fault Prevention: Pre-Fault Waranties, Error checking and correcting | Fault Tolerance: Hardware Redudancy | Rapid Recovery: Automatic System Recovery, Server Disk Array
A couple of months ago, I decided to take 1V0-41.20 C custom-page login device flash:webauth_login.html custom-page success device flash:webauth_success.html custom- page failure device flash:webauth_failure.html custom-page login expired device flash:webauth_expired.html
Wireless LAN (WLAN) ConfigurationHere is the configuration for WLAN. The WLAN is configured for Layer
3 security. This configuration maps the authentication list to Local_webauth and ensures that the authentication is handled by the local net users. This calls the AAA configuration that is in the initial step.
wlan webauth 1 webauthclient vlan Vlanxno security wpano security wpa akm dot1xno security wpa wpa2no security wpa wpa2 ciphers aessecurity web-authsecurity web-auth authentication-list local_webauthsecurity web-auth parameter-map customsession-timeout 1800no shutdown Reference:http://www.cisco.com/c/en/us/support/docs/wireless/5700-series-wireless-lan- controllers/117728-configure-wlc-00.html
NEW QUESTION: 2
wIPSサービスを備えた新しいMSEがインストールされており、アラーム情報がコントローラからMSEに到達していないようです。コントローラからMSEに到達するために許可する必要があるプロトコルはどれですか。
A. NMSP
B. SNMP
C. SOAP/XML
D. CAPWAP
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/mse/7-6/MSE_wIPS/MSE_wIPS_7_6/MSE_wIPS_7_5_chapter_01000.html
NEW QUESTION: 3
Your main internal network 10.10.10.0/24 allows all traffic to the Internet using Hide NAT.
You also have a small network 10.10.20.0/24 behind the internal router. You want to configure the kernel to translate the source address only when network 10.10.20.0 tries to access the Internet for HTTP, SMTP, and FTP services. Which of the following configurations will allow this network to access the Internet?
A. Configure three Manual Static NAT rules for network 10.10.20.0/24, one for each service.
B. Configure Automatic Hide NAT on network 10.10.20.0/24 and then edit the Service column in the NAT Rule Base on the automatic rule.
C. Configure one Manual Hide NAT rule for HTTP, FTP, and SMTP services for network
10.10.20.0/24.
D. Configure Automatic Static NAT on network 10.10.20.0/24.
Answer: C
NEW QUESTION: 4
CORRECT TEXT
Identify the correct system available category for each feature.
Answer:
Explanation:
Fault Prevention: Pre-Fault Waranties, Error checking and correcting | Fault Tolerance: Hardware Redudancy | Rapid Recovery: Automatic System Recovery, Server Disk Array
Just took the C custom-page login device flash:webauth_login.html custom-page success device flash:webauth_success.html custom- page failure device flash:webauth_failure.html custom-page login expired device flash:webauth_expired.html
Wireless LAN (WLAN) ConfigurationHere is the configuration for WLAN. The WLAN is configured for Layer
3 security. This configuration maps the authentication list to Local_webauth and ensures that the authentication is handled by the local net users. This calls the AAA configuration that is in the initial step.
wlan webauth 1 webauthclient vlan Vlanxno security wpano security wpa akm dot1xno security wpa wpa2no security wpa wpa2 ciphers aessecurity web-authsecurity web-auth authentication-list local_webauthsecurity web-auth parameter-map customsession-timeout 1800no shutdown Reference:http://www.cisco.com/c/en/us/support/docs/wireless/5700-series-wireless-lan- controllers/117728-configure-wlc-00.html
NEW QUESTION: 2
wIPSサービスを備えた新しいMSEがインストールされており、アラーム情報がコントローラからMSEに到達していないようです。コントローラからMSEに到達するために許可する必要があるプロトコルはどれですか。
A. NMSP
B. SNMP
C. SOAP/XML
D. CAPWAP
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/mse/7-6/MSE_wIPS/MSE_wIPS_7_6/MSE_wIPS_7_5_chapter_01000.html
NEW QUESTION: 3
Your main internal network 10.10.10.0/24 allows all traffic to the Internet using Hide NAT.
You also have a small network 10.10.20.0/24 behind the internal router. You want to configure the kernel to translate the source address only when network 10.10.20.0 tries to access the Internet for HTTP, SMTP, and FTP services. Which of the following configurations will allow this network to access the Internet?
A. Configure three Manual Static NAT rules for network 10.10.20.0/24, one for each service.
B. Configure Automatic Hide NAT on network 10.10.20.0/24 and then edit the Service column in the NAT Rule Base on the automatic rule.
C. Configure one Manual Hide NAT rule for HTTP, FTP, and SMTP services for network
10.10.20.0/24.
D. Configure Automatic Static NAT on network 10.10.20.0/24.
Answer: C
NEW QUESTION: 4
CORRECT TEXT
Identify the correct system available category for each feature.
Answer:
Explanation:
Fault Prevention: Pre-Fault Waranties, Error checking and correcting | Fault Tolerance: Hardware Redudancy | Rapid Recovery: Automatic System Recovery, Server Disk Array
Have passed the C custom-page login device flash:webauth_login.html custom-page success device flash:webauth_success.html custom- page failure device flash:webauth_failure.html custom-page login expired device flash:webauth_expired.html
Wireless LAN (WLAN) ConfigurationHere is the configuration for WLAN. The WLAN is configured for Layer
3 security. This configuration maps the authentication list to Local_webauth and ensures that the authentication is handled by the local net users. This calls the AAA configuration that is in the initial step.
wlan webauth 1 webauthclient vlan Vlanxno security wpano security wpa akm dot1xno security wpa wpa2no security wpa wpa2 ciphers aessecurity web-authsecurity web-auth authentication-list local_webauthsecurity web-auth parameter-map customsession-timeout 1800no shutdown Reference:http://www.cisco.com/c/en/us/support/docs/wireless/5700-series-wireless-lan- controllers/117728-configure-wlc-00.html
NEW QUESTION: 2
wIPSサービスを備えた新しいMSEがインストールされており、アラーム情報がコントローラからMSEに到達していないようです。コントローラからMSEに到達するために許可する必要があるプロトコルはどれですか。
A. NMSP
B. SNMP
C. SOAP/XML
D. CAPWAP
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/mse/7-6/MSE_wIPS/MSE_wIPS_7_6/MSE_wIPS_7_5_chapter_01000.html
NEW QUESTION: 3
Your main internal network 10.10.10.0/24 allows all traffic to the Internet using Hide NAT.
You also have a small network 10.10.20.0/24 behind the internal router. You want to configure the kernel to translate the source address only when network 10.10.20.0 tries to access the Internet for HTTP, SMTP, and FTP services. Which of the following configurations will allow this network to access the Internet?
A. Configure three Manual Static NAT rules for network 10.10.20.0/24, one for each service.
B. Configure Automatic Hide NAT on network 10.10.20.0/24 and then edit the Service column in the NAT Rule Base on the automatic rule.
C. Configure one Manual Hide NAT rule for HTTP, FTP, and SMTP services for network
10.10.20.0/24.
D. Configure Automatic Static NAT on network 10.10.20.0/24.
Answer: C
NEW QUESTION: 4
CORRECT TEXT
Identify the correct system available category for each feature.
Answer:
Explanation:
Fault Prevention: Pre-Fault Waranties, Error checking and correcting | Fault Tolerance: Hardware Redudancy | Rapid Recovery: Automatic System Recovery, Server Disk Array
NEW QUESTION: 2
wIPSサービスを備えた新しいMSEがインストールされており、アラーム情報がコントローラからMSEに到達していないようです。コントローラからMSEに到達するために許可する必要があるプロトコルはどれですか。
A. NMSP
B. SNMP
C. SOAP/XML
D. CAPWAP
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/mse/7-6/MSE_wIPS/MSE_wIPS_7_6/MSE_wIPS_7_5_chapter_01000.html
NEW QUESTION: 3
Your main internal network 10.10.10.0/24 allows all traffic to the Internet using Hide NAT.
You also have a small network 10.10.20.0/24 behind the internal router. You want to configure the kernel to translate the source address only when network 10.10.20.0 tries to access the Internet for HTTP, SMTP, and FTP services. Which of the following configurations will allow this network to access the Internet?
A. Configure three Manual Static NAT rules for network 10.10.20.0/24, one for each service.
B. Configure Automatic Hide NAT on network 10.10.20.0/24 and then edit the Service column in the NAT Rule Base on the automatic rule.
C. Configure one Manual Hide NAT rule for HTTP, FTP, and SMTP services for network
10.10.20.0/24.
D. Configure Automatic Static NAT on network 10.10.20.0/24.
Answer: C
NEW QUESTION: 4
CORRECT TEXT
Identify the correct system available category for each feature.
Answer:
Explanation:
Fault Prevention: Pre-Fault Waranties, Error checking and correcting | Fault Tolerance: Hardware Redudancy | Rapid Recovery: Automatic System Recovery, Server Disk Array
Great dump. Studying the guide from begin to end, I obtained a ggod score in the
C custom-page login device flash:webauth_login.html custom-page success device flash:webauth_success.html custom- page failure device flash:webauth_failure.html custom-page login expired device flash:webauth_expired.html
Wireless LAN (WLAN) ConfigurationHere is the configuration for WLAN. The WLAN is configured for Layer
3 security. This configuration maps the authentication list to Local_webauth and ensures that the authentication is handled by the local net users. This calls the AAA configuration that is in the initial step.
wlan webauth 1 webauthclient vlan Vlanxno security wpano security wpa akm dot1xno security wpa wpa2no security wpa wpa2 ciphers aessecurity web-authsecurity web-auth authentication-list local_webauthsecurity web-auth parameter-map customsession-timeout 1800no shutdown Reference:http://www.cisco.com/c/en/us/support/docs/wireless/5700-series-wireless-lan- controllers/117728-configure-wlc-00.html
NEW QUESTION: 2
wIPSサービスを備えた新しいMSEがインストールされており、アラーム情報がコントローラからMSEに到達していないようです。コントローラからMSEに到達するために許可する必要があるプロトコルはどれですか。
A. NMSP
B. SNMP
C. SOAP/XML
D. CAPWAP
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/mse/7-6/MSE_wIPS/MSE_wIPS_7_6/MSE_wIPS_7_5_chapter_01000.html
NEW QUESTION: 3
Your main internal network 10.10.10.0/24 allows all traffic to the Internet using Hide NAT.
You also have a small network 10.10.20.0/24 behind the internal router. You want to configure the kernel to translate the source address only when network 10.10.20.0 tries to access the Internet for HTTP, SMTP, and FTP services. Which of the following configurations will allow this network to access the Internet?
A. Configure three Manual Static NAT rules for network 10.10.20.0/24, one for each service.
B. Configure Automatic Hide NAT on network 10.10.20.0/24 and then edit the Service column in the NAT Rule Base on the automatic rule.
C. Configure one Manual Hide NAT rule for HTTP, FTP, and SMTP services for network
10.10.20.0/24.
D. Configure Automatic Static NAT on network 10.10.20.0/24.
Answer: C
NEW QUESTION: 4
CORRECT TEXT
Identify the correct system available category for each feature.
Answer:
Explanation:
Fault Prevention: Pre-Fault Waranties, Error checking and correcting | Fault Tolerance: Hardware Redudancy | Rapid Recovery: Automatic System Recovery, Server Disk Array
Championlandzone Practice Exams are written to the highest standards of technical accuracy, using only certified subject matter experts and published authors for development - no all study materials.
We are committed to the process of vendor and third party approvals. We believe professionals and executives alike deserve the confidence of quality coverage these authorizations provide.
If you prepare for the exams using our Championlandzone testing engine, It is easy to succeed for all certifications in the first attempt. You don't have to deal with all dumps or any free torrent / rapidshare all stuff.
Championlandzone offers free demo of each product. You can check out the interface, question quality and usability of our practice exams before you decide to buy.